P2020 2009 Ford Fusion Code - Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2
Quick Answer
The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2020 2009 Ford Fusion indicates Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2.
- Common causes
- Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2020 2009 Ford Fusion Description
What are the Possible Causes of the DTC P2020 2009 Ford Fusion?
- Faulty Intake Manifold Runner Position Sensor/Switch
- Intake Manifold Runner Position Sensor/Switch harness is open or shorted
- Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection
- Mechanical concern
- bind, seize, damage, or obstruction of IMRC hardware
How to Fix the DTC P2020 2009 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2020 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2020 2009 Ford Fusion code?
Need more information on how to fix the P2020 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2020 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2020 2009 Ford Fusion Code
1. What does OBDII code P2020 for a 2009 Ford Fusion mean?
The code P2020 indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2 in a 2009 Ford Fusion.
2. What are common symptoms of OBDII code P2020 in a 2009 Ford Fusion?
Common symptoms of P2020 may include engine misfires, rough idling, decreased fuel efficiency, and a reduction in overall engine performance.
3. What are possible causes of OBDII code P2020 in a 2009 Ford Fusion?
Potential causes of P2020 include a faulty intake manifold runner position sensor/switch, damaged wiring or connectors, a vacuum leak, or a problem with the intake manifold itself.
4. How can I diagnose the issue related to OBDII code P2020 in my 2009 Ford Fusion?
Diagnosing P2020 may involve using a professional OBDII scanner to retrieve the code, inspecting the intake manifold runner position sensor and its wiring, checking for vacuum leaks, and testing the intake manifold runner control system.
5. Can I continue driving my 2009 Ford Fusion with OBDII code P2020?
It is not recommended to continue driving with an unresolved P2020 code, as it can lead to further engine damage and potential safety issues. It's best to address the underlying problem as soon as possible.
6. How much does it typically cost to repair OBDII code P2020 in a 2009 Ford Fusion?
The cost of repairing P2020 can vary depending on the specific cause of the issue. Repairs may range from replacing a faulty sensor or fixing a wiring problem to addressing more complex issues with the intake manifold, with costs ranging from $100 to $500 or more.
7. Can I fix OBDII code P2020 in my 2009 Ford Fusion myself?
While some DIY enthusiasts may be able to address simpler causes of P2020, such as replacing a sensor or fixing a loose connector, diagnosing and repairing more complex issues may require professional expertise and specialized tools.
8. How long does it take to repair OBDII code P2020 in a 2009 Ford Fusion?
The repair time for P2020 can vary based on the specific cause of the issue and the complexity of the repair. Simple fixes may take an hour or two, while more involved repairs could require several hours or even a full day.
9. Will resetting the OBDII system clear the P2020 code in my 2009 Ford Fusion?
Resetting the OBDII system may temporarily clear the P2020 code, but it will likely return if the underlying issue is not addressed. It's important to diagnose and fix the root cause of the problem to prevent the code from reoccurring.
10. Is the Intake Manifold Runner Position Sensor/Switch a common problem in 2009 Ford Fusion vehicles?
The Intake Manifold Runner Position Sensor/Switch issue is not uncommon in 2009 Ford Fusion vehicles, and it can be a cause of various engine performance problems when malfunctioning. Regular maintenance and prompt repairs can help prevent such issues.
Discuss the causes and fixes for P2020 2009 Ford Fusion OBDII Code
Code P2020 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
