P2020 2008 Ford Fusion Code - Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2
Quick Answer
The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2020 2008 Ford Fusion indicates Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2.
- Common causes
- Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2020 2008 Ford Fusion Description
What are the Possible Causes of the DTC P2020 2008 Ford Fusion?
- Faulty Intake Manifold Runner Position Sensor/Switch
- Intake Manifold Runner Position Sensor/Switch harness is open or shorted
- Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection
- Mechanical concern
- bind, seize, damage, or obstruction of IMRC hardware
How to Fix the DTC P2020 2008 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2020 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2020 2008 Ford Fusion code?
Need more information on how to fix the P2020 2008 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2020 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2020 2008 Ford Fusion Code
1. What are the common symptoms of OBDII code P2020 on a 2008 Ford Fusion?
- Common symptoms include poor engine performance, rough idling, loss of power, and possibly a Check Engine light.
2. What does the OBDII code P2020 on a 2008 Ford Fusion indicate?
- The code indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit on Bank 2.
3. What are possible causes of the P2020 code on a 2008 Ford Fusion?
- Possible causes include a faulty intake manifold runner position sensor/switch, wiring issues, or a problem with the intake manifold runner control module.
4. How can I diagnose the OBDII code P2020 on my 2008 Ford Fusion?
- Diagnosing the code typically involves checking the intake manifold runner position sensor/switch, inspecting the wiring for any damage, and testing the control module.
5. Can I drive my 2008 Ford Fusion with the P2020 code present?
- It is not recommended to drive with the P2020 code as it can lead to further engine damage and poor performance.
6. Is it easy to repair the Intake Manifold Runner Position Sensor/Switch Circuit on a 2008 Ford Fusion?
- The repair process can vary in complexity, but it typically involves replacing the faulty sensor/switch, repairing any wiring issues, or addressing problems with the control module.
7. How much does it cost to fix the P2020 code on a 2008 Ford Fusion?
- The cost of repair can vary depending on the cause of the issue, but it may range from $200 to $500, including parts and labor.
8. Can I reset the Check Engine light after fixing the P2020 code on my 2008 Ford Fusion?
- Yes, you can reset the Check Engine light using an OBDII scanner or by disconnecting the car's battery for a few minutes.
9. Will the P2020 code on a 2008 Ford Fusion cause the car to fail an emissions test?
- Yes, the P2020 code can cause the vehicle to fail an emissions test due to increased emissions and poor engine performance.
10. How can I prevent the OBDII code P2020 from appearing on my 2008 Ford Fusion?
- To prevent the P2020 code, it's important to perform regular maintenance on your vehicle, including inspecting and cleaning the intake manifold components and sensors.
Discuss the causes and fixes for P2020 2008 Ford Fusion OBDII Code
Code P2020 2008 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
