P2020 2007 Ford Fusion Code - Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2
Quick Answer
The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2020 2007 Ford Fusion indicates Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2.
- Common causes
- Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2020 2007 Ford Fusion Description
What are the Possible Causes of the DTC P2020 2007 Ford Fusion?
- Faulty Intake Manifold Runner Position Sensor/Switch
- Intake Manifold Runner Position Sensor/Switch harness is open or shorted
- Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection
- Mechanical concern
- bind, seize, damage, or obstruction of IMRC hardware
How to Fix the DTC P2020 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2020 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2020 2007 Ford Fusion code?
Need more information on how to fix the P2020 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2020 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2020 2007 Ford Fusion Code
1. What are the common symptoms of OBDII code P2020 on a 2007 Ford Fusion?
The common symptoms include engine misfires, rough idling, reduced power, and the illumination of the Check Engine Light.
2. What causes the OBDII code P2020 in a 2007 Ford Fusion?
The code P2020 typically indicates a problem with the intake manifold runner position sensor/switch circuit in Bank 2, which may be triggered by a faulty sensor, wiring issues, or a damaged intake manifold.
3. How can I diagnose the issue causing OBDII code P2020 on my 2007 Ford Fusion?
Diagnosing the issue involves inspecting the intake manifold runner position sensor, checking the wiring for any damage or loose connections, and performing a thorough inspection of the intake manifold components.
4. Can I drive my 2007 Ford Fusion with OBDII code P2020?
It is not recommended to drive the vehicle with the code P2020 active, as it can lead to poor engine performance and potential damage if left unresolved. It is advisable to address the issue promptly.
5. How can I repair OBDII code P2020 on my 2007 Ford Fusion?
Repairing the code P2020 may involve replacing the intake manifold runner position sensor, repairing any damaged wiring, or replacing the intake manifold if necessary. It is recommended to have a professional mechanic diagnose and repair the issue.
6. Is it safe to continue driving my 2007 Ford Fusion if the Check Engine Light is on due to code P2020?
Continuing to drive the vehicle with the Check Engine Light on can potentially cause further damage to the engine. It is best to address the underlying issue causing the code P2020 as soon as possible.
7. How much does it typically cost to repair OBDII code P2020 on a 2007 Ford Fusion?
The cost of repairing the code P2020 can vary depending on the specific cause of the issue, the labor rates of the repair shop, and the cost of parts needed for the repair. It is advisable to obtain quotes from different mechanics for an accurate estimate.
8. Can a DIY enthusiast fix OBDII code P2020 on a 2007 Ford Fusion?
While some experienced DIY enthusiasts may have the skills to address the code P2020, it is generally recommended to have a professional mechanic diagnose and repair the issue to ensure proper resolution and prevent further damage.
9. Will resetting the Check Engine Light resolve OBDII code P2020 on a 2007 Ford Fusion?
Simply resetting the Check Engine Light without addressing the underlying issue causing the code P2020 will not resolve the problem. It is crucial to diagnose and repair the root cause of the code to prevent it from reoccurring.
10. How can I prevent OBDII code P2020 from appearing on my 2007 Ford Fusion in the future?
Regular maintenance, such as inspecting and cleaning the intake manifold components, checking the sensor connections, and addressing any issues promptly, can help prevent the recurrence of OBDII code P2020 on your Ford Fusion.
Discuss the causes and fixes for P2020 2007 Ford Fusion OBDII Code
Code P2020 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
