P2020 2006 Ford Fusion Code - Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2
Quick Answer
The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2020 2006 Ford Fusion indicates Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2.
- Common causes
- Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2020 2006 Ford Fusion Description
What are the Possible Causes of the DTC P2020 2006 Ford Fusion?
- Faulty Intake Manifold Runner Position Sensor/Switch
- Intake Manifold Runner Position Sensor/Switch harness is open or shorted
- Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection
- Mechanical concern
- bind, seize, damage, or obstruction of IMRC hardware
How to Fix the DTC P2020 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2020 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2020 2006 Ford Fusion code?
Need more information on how to fix the P2020 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2020 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2020 2006 Ford Fusion Code
1. What are common symptoms of OBDII code P2020 on a 2006 Ford Fusion?
- Common symptoms include rough idling, reduced engine performance, and illuminated Check Engine light.
2. What does the OBDII code P2020 for a 2006 Ford Fusion indicate?
- The code P2020 indicates an issue with the Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance on bank 2.
3. What are possible causes of OBDII code P2020 on a 2006 Ford Fusion?
- Possible causes include a faulty intake manifold runner position sensor/switch, wiring issues, vacuum leaks, or a problem with the intake manifold itself.
4. How can I diagnose the Intake Manifold Runner Position Sensor/Switch Circuit on my 2006 Ford Fusion?
- Diagnosing this issue may require using a scan tool to check for trouble codes, inspecting the wiring and connections, and testing the sensor's resistance and voltage.
5. What is the recommended repair for OBDII code P2020 on a 2006 Ford Fusion?
- The recommended repair involves replacing the faulty intake manifold runner position sensor/switch and addressing any related wiring or vacuum leaks.
6. Can I continue driving my 2006 Ford Fusion with OBDII code P2020?
- It is not recommended to continue driving with this code present, as it can lead to further engine damage and reduced performance.
7. How much does it typically cost to repair OBDII code P2020 on a 2006 Ford Fusion?
- The cost of repair can vary depending on the extent of the issue and whether professional help is needed, but it generally ranges from $200 to $500.
8. Are there any preventative measures to avoid OBDII code P2020 on a 2006 Ford Fusion?
- Regular maintenance and inspections of the intake manifold system can help prevent issues that may trigger this code.
9. Can a DIY enthusiast repair OBDII code P2020 on a 2006 Ford Fusion?
- While some experienced DIY enthusiasts may be able to replace the intake manifold runner position sensor/switch, it is recommended to consult a professional for accurate diagnosis and repair.
10. How long does it take to repair OBDII code P2020 on a 2006 Ford Fusion?
- The repair time can vary depending on the extent of the issue and the availability of parts, but it typically takes a few hours to complete the repair.
Discuss the causes and fixes for P2020 2006 Ford Fusion OBDII Code
Code P2020 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
