P2019 Jeep Code - Intake Manifold Runner Position Sensor/Switch Circuit Bank 2
Quick Answer
The engine is equipped with an intake manifold flow control valve to promote maximum air/fuel atomization. Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2019 Jeep indicates Intake Manifold Runner Position Sensor/Switch Circuit Bank 2.
- Common causes
- Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2019 Jeep Description
What are the Possible Causes of the DTC P2019 Jeep?
- Faulty Intake Manifold Runner Position Sensor/Switch
- Intake Manifold Runner Position Sensor/Switch harness is open or shorted
- Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection
- Mechanical concern
- bind, seize, damage, or obstruction of IMRC hardware
How to Fix the DTC P2019 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2019 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2019 Jeep code?
Need more information on how to fix the P2019 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2019 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2019 Jeep Code
What does the OBDII code P2019 mean for a Jeep?
P2019 indicates an issue with the Intake Manifold Runner Position Sensor/Switch Circuit on Bank 2, which monitors the position of the intake manifold runner control system.
What are common symptoms of code P2019 on a Jeep?
Common symptoms include reduced engine performance, poor fuel economy, rough idling, and an illuminated Check Engine Light.
What causes the P2019 code to appear on a Jeep?
Causes include a faulty intake manifold runner position sensor, damaged wiring or connectors, carbon buildup in the intake manifold, or a malfunctioning intake manifold control valve.
Can I drive my Jeep with code P2019?
While the vehicle may still be drivable, continuing to drive with this code can lead to further engine performance issues, so it's best to address it promptly.
How can I diagnose the P2019 code on my Jeep?
Diagnosing involves checking the intake manifold runner position sensor, inspecting wiring and connectors for damage, and checking for carbon buildup in the intake manifold.
What parts should I check when troubleshooting code P2019 on a Jeep?
Inspect the intake manifold runner position sensor, intake manifold control valve, wiring, connectors, and the intake manifold for carbon buildup or obstructions.
How do you fix code P2019 on a Jeep?
Repairs may include replacing the intake manifold runner position sensor, cleaning the intake manifold, repairing damaged wiring or connectors, or replacing the intake manifold control valve.
What tools are needed to fix code P2019?
You'll typically need an OBDII scanner, a multimeter, basic hand tools, and potentially a carbon cleaner for intake manifold cleaning.
What is Bank 2 in relation to code P2019 on a Jeep?
Bank 2 refers to the side of the engine opposite of Bank 1, typically the side that does not contain cylinder 1 in a V-type engine.
How much does it cost to repair code P2019 on a Jeep?
Repair costs can range from $150 to $500 depending on whether cleaning, sensor replacement, or intake manifold repairs are required.
Discuss the causes and fixes for P2019 Jeep OBDII Code
Code P2019 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
