P2017 2014 Toyota RAV4 Code - Intake Manifold Runner Position Sensor / Switch Circuit High Bank 1
Quick Answer
The Tumble Control Valve (TCV) is built into the intake manifold. Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2017 2014 Toyota RAV4 indicates Intake Manifold Runner Position Sensor / Switch Circuit High Bank 1.
- Common causes
- Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2017 2014 Toyota RAV4 Description
What are the Possible Causes of the DTC P2017 2014 Toyota RAV4?
- Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator)
- Tumble Control Valve Position Sensor harness is open or shorted
- Tumble Control Valve Position Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2017 2014 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2017 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2017 2014 Toyota RAV4 code?
Need more information on how to fix the P2017 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2017 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2017 2014 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P2017 in a 2014 Toyota RAV4?
The common symptoms of OBDII code P2017 in a 2014 Toyota RAV4 include rough idling, reduced engine performance, and the illumination of the Check Engine Light.
2. What does the OBDII code P2017 "Intake Manifold Runner Position Sensor/Switch Circuit High Bank 1" mean?
The P2017 code indicates that there is a high voltage condition detected in the intake manifold runner position sensor/switch circuit on bank 1 of the engine.
3. What are the possible causes of OBDII code P2017 in a 2014 Toyota RAV4?
Possible causes of OBDII code P2017 in a 2014 Toyota RAV4 include a faulty intake manifold runner position sensor/switch, wiring issues in the sensor circuit, or a problem with the engine control module (ECM).
4. How can I diagnose the OBDII code P2017 in my 2014 Toyota RAV4?
Diagnosing the P2017 code involves using an OBDII scanner to retrieve the code, checking the intake manifold runner position sensor/switch for proper operation, and inspecting the wiring for any damage or loose connections.
5. Can I continue to drive my 2014 Toyota RAV4 with OBDII code P2017?
It is not recommended to continue driving your 2014 Toyota RAV4 with the P2017 code present, as it can lead to further engine issues and potential damage if left unresolved.
6. How can I repair OBDII code P2017 in my 2014 Toyota RAV4?
Repairing the P2017 code may involve replacing the intake manifold runner position sensor/switch, repairing any damaged wiring in the circuit, or resetting the engine control module (ECM) after fixing the issue.
7. Will resetting the Check Engine Light resolve OBDII code P2017 in my 2014 Toyota RAV4?
Simply resetting the Check Engine Light will not resolve the underlying issue causing the P2017 code. It is essential to diagnose and fix the root cause of the problem to prevent the code from reoccurring.
8. How much does it typically cost to repair OBDII code P2017 in a 2014 Toyota RAV4?
The cost of repairing OBDII code P2017 in a 2014 Toyota RAV4 can vary depending on the exact cause of the issue, but it may range from $200 to $500, including parts and labor.
9. Can a DIY enthusiast fix OBDII code P2017 in a 2014 Toyota RAV4?
While some experienced DIY enthusiasts may be able to diagnose and repair OBDII code P2017 in a 2014 Toyota RAV4, it is recommended to consult a professional mechanic for accurate diagnosis and proper repair to avoid any further complications.
10. How often does OBDII code P2017 occur in a 2014 Toyota RAV4?
The occurrence of OBDII code P2017 in a 2014 Toyota RAV4 can vary, but it is relatively uncommon compared to other more common trouble codes.
Discuss the causes and fixes for P2017 2014 Toyota RAV4 OBDII Code
Code P2017 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
