P2017 2010 Dodge Charger Code - Short Runner Valve Position Sensor/Switch Circuit High
Quick Answer
The engine performance and power output is enhanced through the use of the Short Runner Valve (SRV) system. Common causes include Faulty Short Runner Valve (SRV) Assembly, Short Runner Valve (SRV) Assembly harness is open or shorted, Short Runner Valve (SRV) Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2017 2010 Dodge Charger indicates Short Runner Valve Position Sensor/Switch Circuit High .
- Common causes
- Common causes include Faulty Short Runner Valve (SRV) Assembly, Short Runner Valve (SRV) Assembly harness is open or shorted, Short Runner Valve (SRV) Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2017 2010 Dodge Charger Description
What are the Possible Causes of the DTC P2017 2010 Dodge Charger?
- Faulty Short Runner Valve (SRV) Assembly
- Short Runner Valve (SRV) Assembly harness is open or shorted
- Short Runner Valve (SRV) Assembly circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2017 2010 Dodge Charger?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2017 2010 Dodge Charger code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2017 2010 Dodge Charger code?
Need more information on how to fix the P2017 2010 Dodge Charger code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2017 2010 Dodge Charger code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2017 2010 Dodge Charger Code
1. What are the common symptoms of OBDII code P2017 in a 2010 Dodge Charger?
- Common symptoms include rough idling, engine stalling, decreased fuel efficiency, and the Check Engine Light being illuminated.
2. What does the OBDII code P2017 "Short Runner Valve Position Sensor/Switch Circuit High" mean?
- This code indicates that the Engine Control Module (ECM) has detected a high voltage condition in the circuit related to the Short Runner Valve Position Sensor or Switch.
3. What are the possible causes of OBDII code P2017 in a 2010 Dodge Charger?
- The code may be triggered by a faulty Short Runner Valve Position Sensor/Switch, damaged wiring or connectors in the circuit, a malfunctioning ECM, or a vacuum leak in the intake manifold.
4. How can I diagnose the issue causing OBDII code P2017 in my 2010 Dodge Charger?
- Diagnosing the issue may involve visually inspecting wiring and connectors, testing the Short Runner Valve Position Sensor/Switch, checking for vacuum leaks, and using a scan tool to monitor sensor data.
5. Can I continue driving my 2010 Dodge Charger with OBDII code P2017 present?
- It is not recommended to drive your vehicle with this code present, as it can lead to poor engine performance and potentially cause further damage if left unresolved.
6. How can I clear the OBDII code P2017 in my 2010 Dodge Charger?
- Clearing the code can be done using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes. However, the underlying issue should be addressed to prevent the code from reappearing.
7. Is it possible to repair OBDII code P2017 in a 2010 Dodge Charger myself?
- While some DIY enthusiasts may be able to address the issue, diagnosing and repairing the root cause of the code may require specialized tools and expertise, so professional assistance is often recommended.
8. What are the typical repair options for OBDII code P2017 in a 2010 Dodge Charger?
- Repair options may include replacing the Short Runner Valve Position Sensor/Switch, repairing damaged wiring or connectors, fixing vacuum leaks, or reprogramming the ECM if necessary.
9. How much does it cost to fix OBDII code P2017 in a 2010 Dodge Charger?
- The cost of fixing this issue can vary depending on the specific cause of the code, the labor rates in your area, and whether you choose to address the problem yourself or take your vehicle to a mechanic.
10. Are there any preventive maintenance tips to avoid OBDII code P2017 in a 2010 Dodge Charger?
- Regularly servicing your vehicle, checking for vacuum leaks, ensuring proper wiring connections, and using quality fuel can help prevent issues that may trigger this code.
Discuss the causes and fixes for P2017 2010 Dodge Charger OBDII Code
-
Engine light blinking engine misfiring.
Change spark plugs and coils
And nothing worked -
If you have the P2017 code, then the problem is not the spark plugs but the Short Runner Valve Position Sensor.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
