AutoCodes – Dodge – P2017 2009 Dodge Charger

P2017 2009 Dodge Charger Code - Short Runner Valve Position Sensor/Switch Circuit High

Quick Answer

The engine performance and power output is enhanced through the use of the Short Runner Valve (SRV) system. Common causes include Faulty Short Runner Valve (SRV) Assembly, Short Runner Valve (SRV) Assembly harness is open or shorted, Short Runner Valve (SRV) Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2017 2009 Dodge Charger indicates Short Runner Valve Position Sensor/Switch Circuit High .
Common causes: Common causes include Faulty Short Runner Valve (SRV) Assembly, Short Runner Valve (SRV) Assembly harness is open or shorted, Short Runner Valve (SRV) Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,030

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 16, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2017 2009 Dodge Charger Description

The engine performance and power output is enhanced through the use of the Short Runner Valve (SRV) system. The SRV system allows the intake charge air to bypass the long intake manifold runners between the intake manifold plenum and the intake manifold interface to the cylinder heads by providing a shorter runner directly between the plenum and the cylinder head interface The SRV position is controlled by a pneumatic/spring actuator and electronic solenoid valve. When the solenoid is not energized (the rest position), the SRV is held in the closed position. When the solenoid is energized the SRV is moved and held in its opened position. There is a set of enable conditions including a minimum engine coolant and ambient temperature, SRV enable, and Powertrain Coordinator load enable condition. If any of these conditions are not met, then the SRV is de-energized (closed). The DTC will be set when the Powertrain Control Module (PCM) detects that the PWM signal from the SRV Position sensor is above the maximum acceptable value.

OBDII Code P2017 2009 Dodge Charger - Short Runner Valve Position Sensor/Switch Circuit High - AutoCodes.com — P2017 2009 Dodge Charger Code - Short Runner Valve Position Sensor/Switch Circuit High

What does this mean?

What are the Possible Causes of the DTC P2017 2009 Dodge Charger?

Faulty Short Runner Valve (SRV) Assembly
Short Runner Valve (SRV) Assembly harness is open or shorted
Short Runner Valve (SRV) Assembly circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2017 2009 Dodge Charger?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2017 2009 Dodge Charger code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2017 2009 Dodge Charger code?

Need more information on how to fix the P2017 2009 Dodge Charger code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2017 2009 Dodge Charger code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2017 2009 Dodge Charger Code

1. What are the common symptoms of OBDII code P2017 in a 2009 Dodge Charger?

The common symptoms include engine stalling, rough idling, decreased fuel efficiency, and the Check Engine light illuminating.

2. What does the OBDII code P2017 for a 2009 Dodge Charger indicate?

The code P2017 indicates an issue with the Short Runner Valve Position Sensor/Switch Circuit being too high.

3. What are the possible causes of OBDII code P2017 in a 2009 Dodge Charger?

Possible causes include a faulty short runner valve position sensor, a short runner valve that is stuck open or closed, wiring issues, or a problem with the engine control module.

4. How can I diagnose the OBDII code P2017 in my 2009 Dodge Charger?

Diagnosing this code typically involves checking the short runner valve position sensor, inspecting the wiring for any damage, and testing the short runner valve for proper operation.

5. Can I continue driving my 2009 Dodge Charger with OBDII code P2017?

It is not recommended to drive a vehicle with this code active, as it can lead to further damage to the engine and decrease performance.

6. How can I repair OBDII code P2017 in my 2009 Dodge Charger?

Repairing this code may involve replacing the short runner valve position sensor, fixing any wiring issues, cleaning or replacing the short runner valve, or reprogramming the engine control module.

7. Is it possible to reset the OBDII code P2017 in a 2009 Dodge Charger without fixing the underlying issue?

Resetting the code without fixing the underlying issue will only temporarily turn off the Check Engine light, but the problem will likely reoccur.

8. Can a DIY enthusiast fix OBDII code P2017 in a 2009 Dodge Charger?

Depending on your level of expertise, some aspects of diagnosing and repairing this code may be tackled by a DIY enthusiast. However, certain repairs may require specialized tools or professional help.

9. Are there any preventive measures to avoid OBDII code P2017 in a 2009 Dodge Charger?

Regular maintenance, such as checking and cleaning the short runner valve, inspecting the wiring, and keeping up with recommended service intervals, can help prevent issues leading to this code.

10. How much can I expect to pay to repair OBDII code P2017 in a 2009 Dodge Charger?

The cost of repairing this code can vary based on the specific issue, labor rates in your area, and whether you choose to do the repairs yourself or take your vehicle to a professional mechanic.