AutoCodes – Dodge – P2017 2008 Dodge Charger

P2017 2008 Dodge Charger Code - Short Runner Valve Position Sensor/Switch Circuit High

Quick Answer

The engine performance and power output is enhanced through the use of the Short Runner Valve (SRV) system. Common causes include Faulty Short Runner Valve (SRV) Assembly, Short Runner Valve (SRV) Assembly harness is open or shorted, Short Runner Valve (SRV) Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2017 2008 Dodge Charger indicates Short Runner Valve Position Sensor/Switch Circuit High .
Common causes: Common causes include Faulty Short Runner Valve (SRV) Assembly, Short Runner Valve (SRV) Assembly harness is open or shorted, Short Runner Valve (SRV) Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 13,506

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 16, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2017 2008 Dodge Charger Description

The engine performance and power output is enhanced through the use of the Short Runner Valve (SRV) system. The SRV system allows the intake charge air to bypass the long intake manifold runners between the intake manifold plenum and the intake manifold interface to the cylinder heads by providing a shorter runner directly between the plenum and the cylinder head interface The SRV position is controlled by a pneumatic/spring actuator and electronic solenoid valve. When the solenoid is not energized (the rest position), the SRV is held in the closed position. When the solenoid is energized the SRV is moved and held in its opened position. There is a set of enable conditions including a minimum engine coolant and ambient temperature, SRV enable, and Powertrain Coordinator load enable condition. If any of these conditions are not met, then the SRV is de-energized (closed). The DTC will be set when the Powertrain Control Module (PCM) detects that the PWM signal from the SRV Position sensor is above the maximum acceptable value.

OBDII Code P2017 2008 Dodge Charger - Short Runner Valve Position Sensor/Switch Circuit High - AutoCodes.com — P2017 2008 Dodge Charger Code - Short Runner Valve Position Sensor/Switch Circuit High

What does this mean?

What are the Possible Causes of the DTC P2017 2008 Dodge Charger?

Faulty Short Runner Valve (SRV) Assembly
Short Runner Valve (SRV) Assembly harness is open or shorted
Short Runner Valve (SRV) Assembly circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2017 2008 Dodge Charger?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2017 2008 Dodge Charger code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2017 2008 Dodge Charger code?

Need more information on how to fix the P2017 2008 Dodge Charger code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2017 2008 Dodge Charger code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2017 2008 Dodge Charger Code

1. What are the common symptoms of OBDII code P2017 in a 2008 Dodge Charger?

The common symptoms of OBDII code P2017 in a 2008 Dodge Charger include poor engine performance, rough idle, decreased fuel efficiency, and the illumination of the Check Engine Light.

2. What does the OBDII code P2017 indicate in a 2008 Dodge Charger?

OBDII code P2017 in a 2008 Dodge Charger indicates an issue with the Short Runner Valve Position Sensor/Switch Circuit being too high.

3. What are the possible causes of OBDII code P2017 in a 2008 Dodge Charger?

Possible causes of OBDII code P2017 in a 2008 Dodge Charger include a faulty Short Runner Valve Position Sensor/Switch, damaged wiring or connectors, or a problem with the engine control module.

4. How can I diagnose the OBDII code P2017 in a 2008 Dodge Charger?

Diagnosing OBDII code P2017 in a 2008 Dodge Charger involves using an OBDII scanner to retrieve the code, inspecting the Short Runner Valve Position Sensor/Switch and its circuit for any visible issues, and testing the sensor's resistance.

5. Can I still drive my 2008 Dodge Charger with OBDII code P2017?

It is not recommended to drive your 2008 Dodge Charger with OBDII code P2017, as it can lead to further engine damage and decreased performance. It is best to address the issue promptly.

6. How can I repair OBDII code P2017 in my 2008 Dodge Charger?

Repairing OBDII code P2017 in a 2008 Dodge Charger may involve replacing the Short Runner Valve Position Sensor/Switch, repairing any damaged wiring or connectors, and clearing the trouble code with an OBDII scanner.

7. Are there any DIY tips for fixing OBDII code P2017 in a 2008 Dodge Charger?

While some may attempt to replace the Short Runner Valve Position Sensor/Switch themselves, it is recommended to consult a professional mechanic for proper diagnosis and repair to ensure the issue is resolved correctly.

8. How much does it cost to fix OBDII code P2017 in a 2008 Dodge Charger?

The cost to fix OBDII code P2017 in a 2008 Dodge Charger can vary depending on the root cause of the issue, the cost of parts, and the labor rates of the repair shop. It is advisable to get a few quotes from different mechanics.

9. Can a faulty Short Runner Valve Position Sensor/Switch cause other problems in a 2008 Dodge Charger?

Yes, a faulty Short Runner Valve Position Sensor/Switch can cause other issues such as poor engine performance, rough idle, and decreased fuel efficiency in a 2008 Dodge Charger.

10. How long does it take to repair OBDII code P2017 in a 2008 Dodge Charger?

The repair time for OBDII code P2017 in a 2008 Dodge Charger can vary depending on the exact cause of the issue and the availability of parts. It may take anywhere from a few hours to a full day to complete the repair.