AutoCodes – Dodge – P2017 2006 Dodge Charger

P2017 2006 Dodge Charger Code - Short Runner Valve Position Sensor/Switch Circuit High

Quick Answer

The engine performance and power output is enhanced through the use of the Short Runner Valve (SRV) system. Common causes include Faulty Short Runner Valve (SRV) Assembly, Short Runner Valve (SRV) Assembly harness is open or shorted, Short Runner Valve (SRV) Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2017 2006 Dodge Charger indicates Short Runner Valve Position Sensor/Switch Circuit High .
Common causes: Common causes include Faulty Short Runner Valve (SRV) Assembly, Short Runner Valve (SRV) Assembly harness is open or shorted, Short Runner Valve (SRV) Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,435

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 16, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2017 2006 Dodge Charger Description

The engine performance and power output is enhanced through the use of the Short Runner Valve (SRV) system. The SRV system allows the intake charge air to bypass the long intake manifold runners between the intake manifold plenum and the intake manifold interface to the cylinder heads by providing a shorter runner directly between the plenum and the cylinder head interface The SRV position is controlled by a pneumatic/spring actuator and electronic solenoid valve. When the solenoid is not energized (the rest position), the SRV is held in the closed position. When the solenoid is energized the SRV is moved and held in its opened position. There is a set of enable conditions including a minimum engine coolant and ambient temperature, SRV enable, and Powertrain Coordinator load enable condition. If any of these conditions are not met, then the SRV is de-energized (closed). The DTC will be set when the Powertrain Control Module (PCM) detects that the PWM signal from the SRV Position sensor is above the maximum acceptable value.

OBDII Code P2017 2006 Dodge Charger - Short Runner Valve Position Sensor/Switch Circuit High - AutoCodes.com — P2017 2006 Dodge Charger Code - Short Runner Valve Position Sensor/Switch Circuit High

What does this mean?

What are the Possible Causes of the DTC P2017 2006 Dodge Charger?

Faulty Short Runner Valve (SRV) Assembly
Short Runner Valve (SRV) Assembly harness is open or shorted
Short Runner Valve (SRV) Assembly circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2017 2006 Dodge Charger?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2017 2006 Dodge Charger code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2017 2006 Dodge Charger code?

Need more information on how to fix the P2017 2006 Dodge Charger code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2017 2006 Dodge Charger code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2017 2006 Dodge Charger Code

1. What are the common symptoms of OBDII code P2017 in a 2006 Dodge Charger?

- Common symptoms include rough idle, engine stalling, decreased fuel efficiency, and the Check Engine Light illuminating.

2. What does the OBDII code P2017 indicate in a 2006 Dodge Charger?

- OBDII code P2017 indicates an issue with the Short Runner Valve Position Sensor/Switch Circuit High.

3. What are the possible causes of OBDII code P2017 in a 2006 Dodge Charger?

- The possible causes include a faulty short runner valve position sensor/switch, damaged wiring or connectors, or a problem with the short runner valve itself.

4. How can I diagnose the OBDII code P2017 in my 2006 Dodge Charger?

- Diagnosis involves using a scan tool to read the code, inspecting the short runner valve system for any visible damage, and testing the sensor/switch for proper operation.

5. Can I continue driving my 2006 Dodge Charger with OBDII code P2017?

- It is not recommended to continue driving with this code as it can lead to engine performance issues and potential damage if left unresolved.

6. What is the average cost to repair OBDII code P2017 in a 2006 Dodge Charger?

- The cost of repair can vary depending on the exact cause, but it typically ranges from $200 to $500, including parts and labor.

7. Can I repair OBDII code P2017 in my 2006 Dodge Charger myself?

- If you have experience with automotive repairs and access to the necessary tools, you can attempt to repair this code yourself. However, it is recommended to consult a professional if you are unsure.

8. How long does it take to repair OBDII code P2017 in a 2006 Dodge Charger?

- The repair time can vary depending on the cause of the code and the availability of parts. On average, it can take 1-2 hours to diagnose and repair this issue.

9. Are there any preventive measures to avoid OBDII code P2017 in a 2006 Dodge Charger?

- Regular maintenance and inspections of the short runner valve system can help prevent issues that may trigger OBDII code P2017.

10. Will resetting the Check Engine Light resolve OBDII code P2017 in a 2006 Dodge Charger?

- Resetting the Check Engine Light may temporarily turn it off, but it will not fix the underlying issue causing OBDII code P2017. It is important to diagnose and repair the problem to prevent further complications.