P2016 2011 Toyota Camry Code - Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1
Quick Answer
The Intake Manifold Runner Valve (IMRV) system is mounted on the intake manifold and consists of the intake manifold runner valve (IMRV), the IMRV motor and the IMRV position sensor. Common causes include Intake Manifold Runner Valve Binding Or Sticking, Intake Manifold Runner Valve, Vacuum Line Cracked or Broken (Vacuum Leak). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2016 2011 Toyota Camry indicates Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1.
- Common causes
- Common causes include Intake Manifold Runner Valve Binding Or Sticking, Intake Manifold Runner Valve, Vacuum Line Cracked or Broken (Vacuum Leak).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2016 2011 Toyota Camry Description
What are the Possible Causes of the DTC P2016 2011 Toyota Camry?
- Intake Manifold Runner Valve Binding Or Sticking
- Intake Manifold Runner Valve
- Vacuum Line Cracked or Broken (Vacuum Leak)
- Intake Manifold Runner Position Sensor 1 or Wiring
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2016 2011 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2016 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2016 2011 Toyota Camry code?
Need more information on how to fix the P2016 2011 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2016 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2016 2011 Toyota Camry Code
1. What does the OBDII code P2016 mean on a 2011 Toyota Camry?
P2016 indicates an issue with the Intake Manifold Runner Position Sensor or Switch Circuit being stuck in a low voltage condition for Bank 1.
2. What are the common symptoms of the P2016 code in a 2011 Toyota Camry?
Symptoms may include reduced engine performance, poor fuel efficiency, the Check Engine Light turning on, and potential hesitation or misfires.
3. What causes the P2016 code to appear on a 2011 Toyota Camry?
Common causes include a faulty intake manifold runner position sensor, wiring issues (such as damaged or corroded wires), or a stuck intake manifold runner.
4. Can I drive my 2011 Toyota Camry with the P2016 code active?
While the car may still be drivable, it can experience reduced performance and efficiency. Prolonged driving without fixing the issue may lead to further engine damage.
5. How do I diagnose the P2016 code on a 2011 Toyota Camry?
Diagnosis typically involves inspecting the intake manifold runner position sensor, checking the wiring and connectors for damage, and testing the sensor's functionality using a multimeter.
6. How is the P2016 code fixed in a 2011 Toyota Camry?
Repairs might include replacing the intake manifold runner position sensor, repairing damaged wiring, cleaning or replacing a stuck intake manifold runner, or reprogramming the ECU if necessary.
7. How much does it cost to repair the P2016 code on a 2011 Toyota Camry?
Repair costs can vary but typically range from $150 to $400, depending on whether the issue is with the sensor, wiring, or intake manifold runner.
8. Can a dirty intake manifold cause the P2016 code on a 2011 Toyota Camry?
Yes, carbon buildup in the intake manifold can cause the runners to stick, leading to the P2016 code.
9. What tools are needed to fix the P2016 code on a 2011 Toyota Camry?
You'll typically need an OBDII scanner, a multimeter, basic hand tools, and possibly cleaning supplies if carbon buildup is involved.
10. Will resetting the Check Engine Light fix the P2016 code on a 2011 Toyota Camry?
Resetting the light may temporarily clear the code, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P2016 2011 Toyota Camry OBDII Code
Code P2016 2011 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
