AutoCodes – Dodge – P2016 2006 Dodge Charger

P2016 2006 Dodge Charger Code - Short Runner Valve Position Sensor/Switch Circuit Low

Quick Answer

The engine performance and power output is enhanced through the use of the Short Runner Valve (SRV) system. Common causes include Faulty Short Runner Valve (SRV) Assembly, Short Runner Valve (SRV) Assembly harness is open or shorted, Short Runner Valve (SRV) Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2016 2006 Dodge Charger indicates Short Runner Valve Position Sensor/Switch Circuit Low .
Common causes: Common causes include Faulty Short Runner Valve (SRV) Assembly, Short Runner Valve (SRV) Assembly harness is open or shorted, Short Runner Valve (SRV) Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,301

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 16, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2016 2006 Dodge Charger Description

The engine performance and power output is enhanced through the use of the Short Runner Valve (SRV) system. The SRV system allows the intake charge air to bypass the long intake manifold runners between the intake manifold plenum and the intake manifold interface to the cylinder heads by providing a shorter runner directly between the plenum and the cylinder head interface The SRV position is controlled by a pneumatic/spring actuator and electronic solenoid valve. When the solenoid is not energized (the rest position), the SRV is held in the closed position. When the solenoid is energized the SRV is moved and held in its opened position. There is a set of enable conditions including a minimum engine coolant and ambient temperature, SRV enable, and Powertrain Coordinator load enable condition. If any of these conditions are not met, then the SRV is de-energized (closed). The DTC will be set when the Powertrain Control Module (PCM) detects that the PWM signal from the SRV Position sensor is below the minimum acceptable value.

OBDII Code P2016 2006 Dodge Charger - Short Runner Valve Position Sensor/Switch Circuit Low - AutoCodes.com — P2016 2006 Dodge Charger Code - Short Runner Valve Position Sensor/Switch Circuit Low

What does this mean?

What are the Possible Causes of the DTC P2016 2006 Dodge Charger?

Faulty Short Runner Valve (SRV) Assembly
Short Runner Valve (SRV) Assembly harness is open or shorted
Short Runner Valve (SRV) Assembly circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2016 2006 Dodge Charger?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2016 2006 Dodge Charger code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2016 2006 Dodge Charger code?

Need more information on how to fix the P2016 2006 Dodge Charger code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2016 2006 Dodge Charger code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2016 2006 Dodge Charger Code

1. What are the common symptoms of OBDII code P2016 in a 2006 Dodge Charger?

- Common symptoms include rough idling, engine stalling, poor acceleration, and the Check Engine Light illuminating.

2. What does the OBDII code P2016 indicate in a 2006 Dodge Charger?

- The code P2016 indicates an issue with the Short Runner Valve Position Sensor/Switch Circuit being low.

3. What are the possible causes of OBDII code P2016 in a 2006 Dodge Charger?

- Possible causes include a faulty short runner valve position sensor/switch, wiring issues, or a problem with the short runner valve actuator.

4. How can I diagnose the Short Runner Valve Position Sensor/Switch Circuit low issue in my 2006 Dodge Charger?

- Diagnose by checking the wiring connections, testing the sensor/switch for proper functioning, and inspecting the short runner valve actuator.

5. What are the repair options for fixing OBDII code P2016 in a 2006 Dodge Charger?

- Repair options include replacing the short runner valve position sensor/switch, repairing any damaged wiring, or replacing the short runner valve actuator if necessary.

6. Can driving with OBDII code P2016 in a 2006 Dodge Charger cause further damage?

- Driving with this code may lead to poor engine performance and fuel efficiency, so it's advisable to address the issue promptly to prevent potential damage.

7. How much does it typically cost to repair OBDII code P2016 in a 2006 Dodge Charger?

- The cost of repair can vary depending on the exact cause of the issue, but it may range from $150 to $400 for parts and labor.

8. Is it possible to reset the Check Engine Light after fixing OBDII code P2016 in a 2006 Dodge Charger?

- Yes, the Check Engine Light can be reset using an OBDII scanner once the underlying issue has been resolved and the fault codes cleared.

9. Are there any DIY tips for addressing OBDII code P2016 in a 2006 Dodge Charger?

- DIY tips include checking the wiring connections, inspecting the sensor/switch for visible damage, and conducting basic tests before seeking professional help.

10. How can I prevent OBDII code P2016 from recurring in my 2006 Dodge Charger?

- To prevent code P2016 from recurring, ensure regular maintenance, address any related issues promptly, and follow recommended service intervals for your vehicle.