P2015 2007 Ford Fusion Code - Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 1
Quick Answer
The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2015 2007 Ford Fusion indicates Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2015 2007 Ford Fusion Description
What are the Possible Causes of the DTC P2015 2007 Ford Fusion?
- Faulty Intake Manifold Runner Position Sensor/Switch
- Intake Manifold Runner Position Sensor/Switch harness is open or shorted
- Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection
- Mechanical concern
- bind, seize, damage, or obstruction of IMRC hardware
How to Fix the DTC P2015 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2015 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2015 2007 Ford Fusion code?
Need more information on how to fix the P2015 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2015 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2015 2007 Ford Fusion Code
1. What are common symptoms of OBDII code P2015 on a 2007 Ford Fusion?
- Common symptoms include rough idling, loss of power, engine misfires, and the check engine light illuminating on the dashboard.
2. What does the OBDII code P2015 for a 2007 Ford Fusion indicate?
- This code indicates an issue with the Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 1.
3. What are possible causes of OBDII code P2015 on a 2007 Ford Fusion?
- Possible causes include a faulty intake manifold runner position sensor, damaged wiring or connectors, a stuck intake manifold runner, or a malfunctioning engine control module.
4. How can I diagnose the OBDII code P2015 on my 2007 Ford Fusion?
- Diagnosis typically involves using an OBDII scanner to retrieve the fault code, visually inspecting the intake manifold runner position sensor and its wiring, and testing the sensor's resistance.
5. Can I drive my 2007 Ford Fusion with OBDII code P2015?
- It is not recommended to drive the vehicle with this code present, as it can lead to poor engine performance and potential damage if left unresolved.
6. How can I repair OBDII code P2015 on a 2007 Ford Fusion?
- Repair may involve replacing the intake manifold runner position sensor, repairing damaged wiring or connectors, cleaning the intake manifold runner, or reprogramming the engine control module.
7. Will resetting the OBDII code P2015 on a 2007 Ford Fusion make it go away permanently?
- Resetting the code may temporarily turn off the check engine light, but if the underlying issue causing the code is not addressed, it is likely to reappear.
8. Is it safe to ignore OBDII code P2015 on my 2007 Ford Fusion?
- Ignoring this code can lead to reduced engine performance, decreased fuel efficiency, and potential long-term damage to engine components, so it is best to address it promptly.
9. Are there any recalls or technical service bulletins related to OBDII code P2015 on a 2007 Ford Fusion?
- It is recommended to check with Ford dealerships or online resources for any relevant recalls or technical service bulletins related to this specific OBDII code.
10. Can a DIY enthusiast with basic automotive knowledge fix OBDII code P2015 on a 2007 Ford Fusion?
- Depending on the specific cause, a DIY enthusiast with basic automotive knowledge may be able to address this code by following repair guides, but complex issues may require professional help.
Discuss the causes and fixes for P2015 2007 Ford Fusion OBDII Code
Code P2015 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
