AutoCodes – Dodge – P2011 Dodge

P2011 Dodge Code - Intake Manifold Runner Control Circuit/Open Bank 2

Quick Answer

The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. Common causes include Intake Manifold Runner Binding Or Sticking, Faulty Manifold flow valve, Manifold flow valve harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2011 Dodge indicates Intake Manifold Runner Control Circuit/Open Bank 2.
Common causes: Common causes include Intake Manifold Runner Binding Or Sticking, Faulty Manifold flow valve, Manifold flow valve harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,278

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2011 Dodge Description

The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. The linkage attaches to the housing butterfly plate levers. Each IMRC housing is an aluminum casting with two intake air passages for each cylinder. One passage is always open and the other is opened and closed with a butterfly valve plate. The housing uses a return spring to hold the plates closed. The motorized actuator houses internal switches to provide feedback to the Powertrain Control Module (PCM), indicating linkage and plate position. Under about 3000 rpm the vacuum solenoid will be energized. This will allow manifold vacuum to be applied and the butterfly valve plates to stay closed. Above approximately 3000 rpm , the vacuum solenoid will be de-energized. This will allow vacuum to vent from the actuator and the butterfly valve plates to open.

OBDII Code P2011 Dodge - Intake Manifold Runner Control Circuit/Open Bank 2 - AutoCodes.com — P2011 Dodge Code - Intake Manifold Runner Control Circuit/Open Bank 2

What does this mean?

What are the Possible Causes of the DTC P2011 Dodge?

Intake Manifold Runner Binding Or Sticking
Faulty Manifold flow valve
Manifold flow valve harness is open or shorted
Manifold flow valve circuit poor electrical connection

How to Fix the DTC P2011 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2011 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2011 Dodge code?

Need more information on how to fix the P2011 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2011 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2011 Dodge Code

What does the OBDII code P2011 mean for a Dodge vehicle?

The code P2011 indicates an issue with the Intake Manifold Runner Control Circuit on Bank 2, specifically when the circuit is open or not functioning properly.

What are the common symptoms of the P2011 code in Dodge vehicles?

Symptoms may include reduced engine performance, poor fuel efficiency, rough idling, and the check engine light turning on.

What causes the P2011 code to appear in a Dodge vehicle?

Common causes include a faulty intake manifold runner control actuator, damaged wiring or connectors, carbon buildup on intake components, or a malfunctioning PCM.

How is the P2011 code diagnosed in a Dodge vehicle?

A mechanic will use an OBDII scanner to confirm the code, inspect the intake manifold runner control actuator, check wiring and connectors for damage, and test the circuit for proper operation.

Can I drive my Dodge vehicle with the P2011 code active?

Driving with the P2011 code is not recommended as it can lead to reduced performance, increased fuel consumption, and potential engine damage over time.

How can I fix the P2011 code in a Dodge vehicle?

Repairs may include replacing the intake manifold runner control actuator, cleaning carbon buildup, repairing damaged wiring or connectors, or updating/reprogramming the PCM.

How much does it cost to fix the P2011 code in a Dodge vehicle?

Repair costs vary but typically range from $150 to $600 depending on the parts and labor required to address the issue.

What tools are needed to repair the P2011 code in a Dodge vehicle?

Tools may include an OBDII scanner, basic hand tools, a multimeter for electrical testing, and cleaning supplies for carbon buildup.

Does the P2011 code affect emissions in Dodge vehicles?

Yes, the P2011 code can negatively impact emissions as the intake manifold runner control system helps optimize air-fuel mixture and combustion efficiency.

What is the intake manifold runner control system in Dodge vehicles?

The system adjusts airflow through the intake manifold to improve engine performance and efficiency, especially at different RPM ranges.