AutoCodes – Ford – P2008 2012 Ford Fusion

P2008 2012 Ford Fusion Code - Intake Manifold Runner Control Circuit/Open Bank 1

Quick Answer

The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. Common causes include Faulty Intake Manifold Runner Control (IMRC) actuator, Intake Manifold Runner Control actuator harness is open or shorted, Intake Manifold Runner Control actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2008 2012 Ford Fusion indicates Intake Manifold Runner Control Circuit/Open Bank 1.
Common causes: Common causes include Faulty Intake Manifold Runner Control (IMRC) actuator, Intake Manifold Runner Control actuator harness is open or shorted, Intake Manifold Runner Control actuator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,536

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 03, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2008 2012 Ford Fusion Description

The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. The linkage attaches to the housing butterfly plate levers. Each IMRC housing is an aluminum casting with two intake air passages for each cylinder. One passage is always open, and the other is opened and closed with a butterfly valve plate. The housing uses a return spring to hold the plates closed. The motorized actuator houses internal switches to provide feedback to the Powertrain Control Module (PCM), indicating linkage and plate position. Under about 3000 rpm, the vacuum solenoid will be energized. This will allow the manifold vacuum to be applied and the butterfly valve plates to stay closed. Above approximately 3000 rpm, the vacuum solenoid will be de-energized. This will allow a vacuum to vent from the actuator and the butterfly valve plates to open. The Diagnostic Trouble Code (DTC) indicates a failure in the IMRC primary control circuit.

OBDII Code P2008 2012 Ford Fusion - Intake Manifold Runner Control Circuit/Open Bank 1 - AutoCodes.com — P2008 2012 Ford Fusion Code - Intake Manifold Runner Control Circuit/Open Bank 1

What does this mean?

What are the Possible Causes of the DTC P2008 2012 Ford Fusion?

Faulty Intake Manifold Runner Control (IMRC) actuator
Intake Manifold Runner Control actuator harness is open or shorted
Intake Manifold Runner Control actuator circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2008 2012 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2008 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2008 2012 Ford Fusion code?

Need more information on how to fix the P2008 2012 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2008 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2008 2012 Ford Fusion Code

1. What are the common symptoms of OBDII code P2008 on a 2012 Ford Fusion?

- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and the illumination of the Check Engine Light.

2. What does the OBDII code P2008 "Intake Manifold Runner Control Circuit/Open Bank 1" mean on a 2012 Ford Fusion?

- This code indicates that there is an issue with the intake manifold runner control circuit on bank 1, specifically that it is open or not functioning properly.

3. What are the possible causes of OBDII code P2008 on a 2012 Ford Fusion?

- The possible causes include a faulty intake manifold runner control valve, damaged wiring or connectors in the control circuit, or a problem with the intake manifold itself.

4. How can I diagnose the cause of OBDII code P2008 on my 2012 Ford Fusion?

- Diagnosis typically involves checking the intake manifold runner control valve, inspecting the wiring and connectors for damage, and testing the circuit for proper function using a multimeter.

5. Can I continue to drive my 2012 Ford Fusion with OBDII code P2008 present?

- It is not recommended to drive the vehicle with this code present, as it can lead to further engine damage and decreased performance. It is best to address the issue promptly.

6. What are the repair options for OBDII code P2008 on a 2012 Ford Fusion?

- Repair options may include replacing the intake manifold runner control valve, repairing or replacing damaged wiring or connectors, or cleaning and inspecting the intake manifold for any issues.

7. How much does it typically cost to repair OBDII code P2008 on a 2012 Ford Fusion?

- The cost of repair can vary depending on the exact cause of the issue, but it may range from $200 to $600, including parts and labor.

8. Are there any DIY tips for fixing OBDII code P2008 on a 2012 Ford Fusion?

- While some simple tasks like checking and cleaning connectors can be done by DIY enthusiasts, diagnosing and repairing the root cause of the code may require professional expertise.

9. How long does it take to repair OBDII code P2008 on a 2012 Ford Fusion?

- The repair time can vary based on the exact issue and the availability of parts, but it typically takes a few hours to a full day for a mechanic to diagnose and fix the problem.

10. Will resetting the Check Engine Light clear OBDII code P2008 on a 2012 Ford Fusion?

- Resetting the Check Engine Light may temporarily turn it off, but if the underlying issue causing code P2008 is not addressed, the light is likely to come back on. It's important to diagnose and fix the root cause of the problem.