AutoCodes – Ford – P2008 2007 Ford Fusion

P2008 2007 Ford Fusion Code - Intake Manifold Runner Control Circuit/Open Bank 1

Quick Answer

The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. Common causes include Faulty Intake Manifold Runner Control (IMRC) actuator, Intake Manifold Runner Control actuator harness is open or shorted, Intake Manifold Runner Control actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2008 2007 Ford Fusion indicates Intake Manifold Runner Control Circuit/Open Bank 1.
Common causes: Common causes include Faulty Intake Manifold Runner Control (IMRC) actuator, Intake Manifold Runner Control actuator harness is open or shorted, Intake Manifold Runner Control actuator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,173

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 03, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2008 2007 Ford Fusion Description

The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. The linkage attaches to the housing butterfly plate levers. Each IMRC housing is an aluminum casting with two intake air passages for each cylinder. One passage is always open, and the other is opened and closed with a butterfly valve plate. The housing uses a return spring to hold the plates closed. The motorized actuator houses internal switches to provide feedback to the Powertrain Control Module (PCM), indicating linkage and plate position. Under about 3000 rpm, the vacuum solenoid will be energized. This will allow the manifold vacuum to be applied and the butterfly valve plates to stay closed. Above approximately 3000 rpm, the vacuum solenoid will be de-energized. This will allow a vacuum to vent from the actuator and the butterfly valve plates to open. The Diagnostic Trouble Code (DTC) indicates a failure in the IMRC primary control circuit.

OBDII Code P2008 2007 Ford Fusion - Intake Manifold Runner Control Circuit/Open Bank 1 - AutoCodes.com — P2008 2007 Ford Fusion Code - Intake Manifold Runner Control Circuit/Open Bank 1

What does this mean?

What are the Possible Causes of the DTC P2008 2007 Ford Fusion?

Faulty Intake Manifold Runner Control (IMRC) actuator
Intake Manifold Runner Control actuator harness is open or shorted
Intake Manifold Runner Control actuator circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2008 2007 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2008 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2008 2007 Ford Fusion code?

Need more information on how to fix the P2008 2007 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2008 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2008 2007 Ford Fusion Code

1. What are the common symptoms of OBDII code P2008 (Intake Manifold Runner Control Circuit/Open Bank 1) in a 2007 Ford Fusion?

The common symptoms include rough idle, engine misfires, decreased fuel efficiency, and a noticeable lack of power during acceleration.

2. What can cause the P2008 code to trigger in a 2007 Ford Fusion?

The P2008 code is typically triggered by a faulty intake manifold runner control (IMRC) actuator, a vacuum leak in the intake system, or a problem with the IMRC solenoid.

3. How serious is the P2008 OBDII code in a 2007 Ford Fusion?

While the P2008 code may not cause immediate engine failure, it can lead to poor engine performance, reduced fuel efficiency, and potential long-term damage if left unresolved.

4. Can I continue driving my 2007 Ford Fusion with the P2008 code present?

It is not recommended to drive your Fusion with the P2008 code active, as it can cause further damage to the engine and negatively impact overall performance.

5. How can I diagnose and repair the P2008 code in my 2007 Ford Fusion?

Diagnosing and repairing the P2008 code involves inspecting the IMRC system components for any visible damage, testing the IMRC actuator and solenoid for proper operation, and checking for vacuum leaks in the intake system.

6. Will resetting the OBDII code P2008 in my 2007 Ford Fusion make it go away permanently?

Resetting the code may temporarily turn off the check engine light, but if the underlying issue causing the P2008 code is not addressed, the code is likely to reappear.

7. Is it possible to fix the Intake Manifold Runner Control Circuit/Open Bank 1 issue in a 2007 Ford Fusion without professional help?

While some DIY enthusiasts may be able to diagnose and replace faulty components causing the P2008 code, it is recommended to seek professional help for a thorough inspection and proper repair.

8. How much does it typically cost to repair the P2008 code in a 2007 Ford Fusion?

The cost of repairing the P2008 code can vary depending on the root cause of the issue, but it may range from $200 to $500 or more, including parts and labor.

9. Can a clogged intake manifold also trigger the P2008 code in a 2007 Ford Fusion?

Yes, a clogged intake manifold can restrict airflow and disrupt the operation of the IMRC system, potentially leading to the P2008 code being triggered.

10. Will driving my 2007 Ford Fusion with the P2008 code damage the catalytic converter?

Continued driving with the P2008 code may lead to unburned fuel entering the exhaust system, potentially causing damage to the catalytic converter over time.