P2006 2015 Toyota RAV4 Code - Intake Manifold Runner Control Stuck Closed Bank 1
Quick Answer
The Tumble Control Valve (TCV) is built into the intake manifold. Common causes include Faulty Intake Air Control Valve Actuator (For Tumble Control Valve), Intake Air Control Valve Actuator harness is open or shorted, Intake Air Control Valve Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2006 2015 Toyota RAV4 indicates Intake Manifold Runner Control Stuck Closed Bank 1.
- Common causes
- Common causes include Faulty Intake Air Control Valve Actuator (For Tumble Control Valve), Intake Air Control Valve Actuator harness is open or shorted, Intake Air Control Valve Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2006 2015 Toyota RAV4 Description
When the tumble control valve is closed, the intake air tumble flow intensifies, and negative pressure is generated between the tumble control valve and intake valve which atomizes the fuel. Combustion is enhanced and exhaust gas emissions are reduced at low temperatures.
When the ECM has requested a tumble control valve open operation but the actual tumble control valve opening angle is less than 35 deg. for 10 seconds, DTC P2006 is stored.
What are the Possible Causes of the DTC P2006 2015 Toyota RAV4?
- Faulty Intake Air Control Valve Actuator (For Tumble Control Valve)
- Intake Air Control Valve Actuator harness is open or shorted
- Intake Air Control Valve Actuator circuit poor electrical connection
- Faulty Intake manifold
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2006 2015 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2006 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2006 2015 Toyota RAV4 code?
Need more information on how to fix the P2006 2015 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2006 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2006 2015 Toyota RAV4 Code
1. What does the OBDII code P2006 mean on a 2015 Toyota RAV4?
P2006 indicates that the Intake Manifold Runner Control (IMRC) for Bank 1 is stuck in the closed position.
2. What are the common symptoms of a P2006 code on a 2015 Toyota RAV4?
Symptoms may include reduced engine performance, poor fuel economy, hesitation during acceleration, and the Check Engine Light being illuminated.
3. What causes the P2006 code to appear on a 2015 Toyota RAV4?
Common causes include a faulty intake manifold runner control valve, carbon buildup in the intake manifold, damaged wiring or connectors, or a malfunctioning actuator.
4. Can I drive my 2015 Toyota RAV4 with a P2006 code?
Driving with a P2006 code is possible but not recommended, as it can lead to reduced performance and potential long-term engine damage if not addressed.
5. How do I fix the P2006 code on a 2015 Toyota RAV4?
Repairs may involve cleaning the intake manifold, replacing the IMRC valve or actuator, repairing damaged wiring, or reprogramming the engine control module (ECM).
6. How is the P2006 code diagnosed on a 2015 Toyota RAV4?
A mechanic will use a scan tool to confirm the code, inspect the IMRC system for damage or carbon buildup, and test the actuator and wiring for proper operation.
7. What tools are needed to repair the P2006 code on a 2015 Toyota RAV4?
Common tools include a diagnostic scan tool, multimeter, basic hand tools for disassembly, and possibly a carbon cleaning solution for the intake manifold.
8. How much does it cost to fix a P2006 code on a 2015 Toyota RAV4?
Repair costs vary but typically range from $200 to $600 depending on whether cleaning or part replacement is required and labor rates in your area.
9. Can a dirty air filter cause a P2006 code on a 2015 Toyota RAV4?
While unlikely, a severely clogged air filter could contribute to airflow issues, which may indirectly affect the intake manifold runner control system.
10. Will clearing the code with a scan tool fix the P2006 issue on a 2015 Toyota RAV4?
Clearing the code will turn off the Check Engine Light temporarily, but the issue will likely return if the underlying problem is not resolved.
Discuss the causes and fixes for P2006 2015 Toyota RAV4 OBDII Code
Code P2006 2015 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
