P2006 2014 Toyota RAV4 Code - Intake Manifold Runner Control Stuck Closed Bank 1
Quick Answer
The Tumble Control Valve (TCV) is built into the intake manifold. Common causes include Faulty Intake Air Control Valve Actuator (For Tumble Control Valve), Intake Air Control Valve Actuator harness is open or shorted, Intake Air Control Valve Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2006 2014 Toyota RAV4 indicates Intake Manifold Runner Control Stuck Closed Bank 1.
- Common causes
- Common causes include Faulty Intake Air Control Valve Actuator (For Tumble Control Valve), Intake Air Control Valve Actuator harness is open or shorted, Intake Air Control Valve Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2006 2014 Toyota RAV4 Description
When the tumble control valve is closed, the intake air tumble flow intensifies, and negative pressure is generated between the tumble control valve and intake valve which atomizes the fuel. Combustion is enhanced and exhaust gas emissions are reduced at low temperatures.
When the ECM has requested a tumble control valve open operation but the actual tumble control valve opening angle is less than 35 deg. for 10 seconds, DTC P2006 is stored.
What are the Possible Causes of the DTC P2006 2014 Toyota RAV4?
- Faulty Intake Air Control Valve Actuator (For Tumble Control Valve)
- Intake Air Control Valve Actuator harness is open or shorted
- Intake Air Control Valve Actuator circuit poor electrical connection
- Faulty Intake manifold
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2006 2014 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2006 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2006 2014 Toyota RAV4 code?
Need more information on how to fix the P2006 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2006 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2006 2014 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P2006 in a 2014 Toyota RAV4?
The common symptoms of code P2006 (Intake Manifold Runner Control Stuck Closed Bank 1) in a 2014 Toyota RAV4 include rough idling, decreased engine performance, and the illumination of the check engine light.
2. What are the possible causes of OBDII code P2006 in a 2014 Toyota RAV4?
Possible causes of code P2006 in a 2014 Toyota RAV4 could include a faulty intake manifold runner control (IMRC) actuator, a stuck closed intake manifold runner, wiring issues, or a malfunctioning engine control module (ECM).
3. How can I diagnose OBDII code P2006 in my 2014 Toyota RAV4?
Diagnosing code P2006 typically involves using a scan tool to retrieve the fault codes, inspecting the intake manifold runner control system for any visible damage or obstructions, and testing the IMRC actuator for proper operation.
4. Can I continue driving my 2014 Toyota RAV4 with OBDII code P2006?
While it may be possible to drive the vehicle with code P2006, it is not recommended as it can lead to reduced engine performance and potential long-term damage. It's advisable to address the issue promptly.
5. How can I repair OBDII code P2006 in my 2014 Toyota RAV4?
Repairing code P2006 may involve replacing the intake manifold runner control actuator, clearing the fault codes with a scan tool, and ensuring proper operation of the IMRC system. In some cases, wiring repairs or ECM replacement may be necessary.
6. Is OBDII code P2006 a common issue in 2014 Toyota RAV4 vehicles?
While not extremely common, OBDII code P2006 can occur in 2014 Toyota RAV4 vehicles, especially in cases where there are issues with the intake manifold runner control system or related components.
7. What are the potential long-term effects of ignoring OBDII code P2006 in a 2014 Toyota RAV4?
Ignoring code P2006 can lead to decreased fuel efficiency, potential engine misfires, and increased emissions. It's important to address the underlying issue to prevent further damage.
8. Can a DIY enthusiast fix OBDII code P2006 in a 2014 Toyota RAV4?
Depending on their skill level and access to tools, a DIY enthusiast may be able to address code P2006 by following repair guides, but it's recommended to consult a professional mechanic for accurate diagnosis and repair.
9. How much does it typically cost to repair OBDII code P2006 in a 2014 Toyota RAV4?
The cost of repairing code P2006 can vary depending on the exact cause of the issue, but it may range from $200 to $500 or more, including parts and labor.
10. Can OBDII code P2006 be intermittent in a 2014 Toyota RAV4?
Yes, code P2006 can sometimes be intermittent, with the symptoms coming and going. It's important to address the underlying cause even if the issue seems to resolve temporarily.
Discuss the causes and fixes for P2006 2014 Toyota RAV4 OBDII Code
Code P2006 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
