P2006 2010 Ford Fusion Code - Intake Manifold Runner Control Stuck Closed Bank 1
Quick Answer
The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. Common causes include Faulty Intake Manifold Runner Control (IMRC) Solenoid, Intake Manifold Runner Control Solenoid is open or shorted, Intake Manifold Runner Control Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2006 2010 Ford Fusion indicates Intake Manifold Runner Control Stuck Closed Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Runner Control (IMRC) Solenoid, Intake Manifold Runner Control Solenoid is open or shorted, Intake Manifold Runner Control Solenoid circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2006 2010 Ford Fusion Description
What are the Possible Causes of the DTC P2006 2010 Ford Fusion?
- Faulty Intake Manifold Runner Control (IMRC) Solenoid
- Intake Manifold Runner Control Solenoid is open or shorted
- Intake Manifold Runner Control Solenoid circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2006 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2006 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2006 2010 Ford Fusion code?
Need more information on how to fix the P2006 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2006 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2006 2010 Ford Fusion Code
1. What does the OBDII code P2006 mean on a 2010 Ford Fusion?
P2006 indicates that the Intake Manifold Runner Control (IMRC) for Bank 1 is stuck in the closed position, affecting engine airflow and performance.
2. What are the common symptoms of a P2006 code on a 2010 Ford Fusion?
Symptoms may include reduced engine performance, poor fuel efficiency, rough idling, hesitation during acceleration, and the Check Engine Light turning on.
3. What causes the P2006 code to appear on a 2010 Ford Fusion?
Common causes include a stuck IMRC valve, carbon buildup on the intake manifold, a faulty IMRC actuator or solenoid, damaged wiring, or a malfunctioning PCM.
4. Can I drive my 2010 Ford Fusion with a P2006 code?
While the car may still be drivable, prolonged operation with this code can lead to reduced performance and potentially damage other engine components.
5. How do I fix the P2006 code on a 2010 Ford Fusion?
Repairs may include cleaning or replacing the IMRC valve, checking for and repairing damaged wiring, replacing the IMRC actuator, or addressing carbon buildup in the intake manifold.
6. How much does it cost to fix a P2006 code on a 2010 Ford Fusion?
Costs vary but may range from $150 to $600 depending on whether cleaning, part replacement, or professional diagnostics are required.
7. Can carbon buildup cause the P2006 code on a 2010 Ford Fusion?
Yes, carbon buildup in the intake manifold can cause the IMRC to stick closed, leading to the P2006 code.
8. How do I diagnose the P2006 code on a 2010 Ford Fusion?
Diagnosis typically involves scanning for additional codes, inspecting the IMRC actuator and linkage, checking for carbon buildup, and testing the wiring and connectors.
9. What is the Intake Manifold Runner Control (IMRC) system?
The IMRC system adjusts airflow in the intake manifold to optimize engine performance at different RPMs by opening or closing runners.
10. Can a faulty PCM cause the P2006 code on a 2010 Ford Fusion?
While rare, a malfunctioning PCM can occasionally cause the P2006 code if it fails to properly control the IMRC system.
Discuss the causes and fixes for P2006 2010 Ford Fusion OBDII Code
Code P2006 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
