P2006 2006 Toyota Camry Code - Intake Manifold Runner Control Stuck Closed Bank 1
Quick Answer
The Intake Manifold Runner Valve (IMRV) system is mounted on the intake manifold and consists of the intake manifold runner valve (IMRV), the IMRV motor and the IMRV position sensor. Common causes include Intake Manifold Runner Valve Binding Or Sticking, Intake Manifold Runner Valve, Vacuum Line Cracked or Broken (Vacuum Leak). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2006 2006 Toyota Camry indicates Intake Manifold Runner Control Stuck Closed Bank 1.
- Common causes
- Common causes include Intake Manifold Runner Valve Binding Or Sticking, Intake Manifold Runner Valve, Vacuum Line Cracked or Broken (Vacuum Leak).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2006 2006 Toyota Camry Description
The IMRV has a groove on its upper portion.
When the IMRV is closed, air flows through a groove into the cylinder from the intake manifold, so that a dynamic air flow or ”tumble” air flow is generated in the cylinder. The tumble air flow drastically reduces fuel deposits inside the intake air port and the combustion wall surface inside the cylinder. This improves the combustion efficiency by boosting the air−fuel mixture and air flow turbulence.
What are the Possible Causes of the DTC P2006 2006 Toyota Camry?
- Intake Manifold Runner Valve Binding Or Sticking
- Intake Manifold Runner Valve
- Vacuum Line Cracked or Broken (Vacuum Leak)
- Intake Manifold Runner Position Sensor 1 or Wiring
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2006 2006 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2006 2006 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2006 2006 Toyota Camry code?
Need more information on how to fix the P2006 2006 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2006 2006 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2006 2006 Toyota Camry Code
1. What does the OBDII code P2006 mean on a 2006 Toyota Camry?
Code P2006 indicates that the Intake Manifold Runner Control (IMRC) for Bank 1 is stuck in the closed position, which can affect engine performance.
2. What are the common symptoms of code P2006 on a 2006 Toyota Camry?
Symptoms may include reduced engine power, poor fuel economy, rough idle, hesitation during acceleration, and an illuminated Check Engine Light.
3. What causes the P2006 code to appear in a 2006 Toyota Camry?
Causes can include a faulty intake manifold runner control valve, carbon buildup in the intake manifold, a broken IMRC actuator, vacuum leaks, or electrical issues such as damaged wiring or connectors.
4. Can I drive my 2006 Toyota Camry with a P2006 code?
While the car may still be drivable, it’s not recommended to ignore the issue as it can lead to reduced performance, higher fuel consumption, and potential engine damage over time.
5. How do I fix a P2006 code on a 2006 Toyota Camry?
Common fixes include cleaning the intake manifold and runner valves, repairing or replacing the IMRC actuator, checking and fixing any vacuum leaks, or addressing damaged wiring or connectors.
6. How much does it cost to repair a P2006 code on a 2006 Toyota Camry?
Repair costs vary depending on the issue but can range from $150 to $600, including parts and labor, with intake manifold runner control valve replacement being on the higher end.
7. How can carbon buildup cause the P2006 code on a 2006 Toyota Camry?
Carbon buildup can cause the intake manifold runner valves to stick in the closed position, preventing proper airflow and triggering the P2006 code.
8. What tools are needed to diagnose the P2006 code on a 2006 Toyota Camry?
A diagnostic scan tool, a multimeter for electrical testing, and basic hand tools for inspecting the intake manifold and IMRC components are commonly needed.
9. Is a faulty intake manifold runner control valve the only cause of the P2006 code?
No, other causes include carbon buildup, vacuum leaks, actuator failure, or wiring and connector issues related to the IMRC system.
10. Will clearing the P2006 code fix the issue permanently?
Clearing the code may turn off the Check Engine Light temporarily, but the underlying issue must be diagnosed and repaired to prevent the code from returning.
Discuss the causes and fixes for P2006 2006 Toyota Camry OBDII Code
Code P2006 2006 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
