P1930 Mazda Code - Fuel Additive Level Too Low/Empty
Quick Answer
P1930 Mazda indicates Fuel Additive Level Too Low/Empty. Common causes include Faulty Fuel Additive Level, Fuel Additive Level harness is open or shorted, Fuel Additive Level circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1930 Mazda indicates Fuel Additive Level Too Low/Empty.
- Common causes
- Common causes include Faulty Fuel Additive Level, Fuel Additive Level harness is open or shorted, Fuel Additive Level circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1930 Mazda Description
What are the Possible Causes of the DTC P1930 Mazda?
- Faulty Fuel Additive Level
- Fuel Additive Level harness is open or shorted
- Fuel Additive Level circuit poor electrical connection
How to Fix the DTC P1930 Mazda?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1930 Mazda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1930 Mazda code?
Need more information on how to fix the P1930 Mazda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1930 Mazda code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1930 Mazda Code
1. What are the common symptoms of OBDII code P1930 in a Mazda related to the fuel additive level being too low/empty?
- Common symptoms include the check engine light illuminating, reduced engine performance, and potential issues with the exhaust system.
2. What could cause the OBDII code P1930 in a Mazda indicating a low fuel additive level?
- Possible causes include running out of the required fuel additive, a faulty fuel additive system sensor, or a malfunction in the fuel additive system.
3. How can I diagnose the OBDII code P1930 related to the fuel additive level issue in my Mazda?
- Diagnosis typically involves checking the fuel additive tank level, inspecting the fuel additive system components for any damage or leaks, and using an OBDII scanner to read the code.
4. Are there any safety concerns associated with the OBDII code P1930 in a Mazda?
- While the code itself may not pose an immediate safety threat, it is essential to address the underlying fuel additive level issue to prevent potential damage to the engine or emissions system.
5. Can I continue driving my Mazda with the OBDII code P1930 indicating a low fuel additive level?
- It is not recommended to drive for an extended period with this code active, as it can lead to decreased engine performance and potential damage to the emissions control system.
6. How can I reset the OBDII code P1930 in my Mazda after addressing the fuel additive level problem?
- Once the fuel additive level issue is resolved, the code can be cleared using an OBDII scanner or by disconnecting the car's battery for a few minutes.
7. Are there any DIY repair tips for fixing the OBDII code P1930 related to the fuel additive level in a Mazda?
- DIY repairs may include refilling the fuel additive tank with the correct additive, checking for leaks or damage in the fuel additive system, and ensuring the sensor is functioning correctly.
8. Can a mechanic help me diagnose and repair the OBDII code P1930 in my Mazda?
- Yes, a qualified mechanic can conduct a thorough diagnosis using specialized tools, identify the root cause of the issue, and perform any necessary repairs to address the fuel additive level problem.
9. Is the OBDII code P1930 related to the fuel additive level specific to Mazda vehicles only?
- While the code may be more commonly associated with Mazda vehicles, other car manufacturers may also use similar codes for fuel additive level issues in their vehicles.
10. Will ignoring the OBDII code P1930 in my Mazda lead to more severe engine or emissions system problems?
- Ignoring the code can potentially lead to reduced engine efficiency, increased emissions, and long-term damage to the engine or emissions control components if the fuel additive level issue is not addressed promptly.
Discuss the causes and fixes for P1930 Mazda OBDII Code
Code P1930 Mazda comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
