AutoCodes – Volkswagen – P1913 Volkswagen

P1913 Volkswagen Code - Brake Servo Pressure Sensor Short To Ground

Quick Answer

P1913 Volkswagen indicates Brake Servo Pressure Sensor Short To Ground. Common causes include Faulty Brake Servo Pressure Sensor, Brake Servo Pressure Sensor harness is open or shorted, Brake Servo Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1913 Volkswagen indicates Brake Servo Pressure Sensor Short To Ground.
Common causes
Common causes include Faulty Brake Servo Pressure Sensor, Brake Servo Pressure Sensor harness is open or shorted, Brake Servo Pressure Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 8,111
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 27, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1913 Volkswagen Description

OBDII Code P1913 Volkswagen - Brake Servo Pressure Sensor Short To Ground - AutoCodes.com
P1913 Volkswagen Code - Brake Servo Pressure Sensor Short To Ground

What are the Possible Causes of the DTC P1913 Volkswagen?

  • Faulty Brake Servo Pressure Sensor
  • Brake Servo Pressure Sensor harness is open or shorted
  • Brake Servo Pressure Sensor circuit poor electrical connection

How to Fix the DTC P1913 Volkswagen?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1913 Volkswagen code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1913 Volkswagen code?

Need more information on how to fix the P1913 Volkswagen code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1913 Volkswagen code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1913 Volkswagen Code

1. What does the OBDII code P1913 mean on a Volkswagen?

P1913 indicates a "Brake Servo Pressure Sensor Short to Ground," meaning the sensor that monitors brake servo pressure has an electrical issue, typically caused by a short circuit to the ground.

2. What are the symptoms of code P1913 in a Volkswagen?

Common symptoms include reduced braking performance, illuminated ABS or brake warning lights, and possible activation of limp mode.

3. What causes the P1913 code in a Volkswagen?

The most common causes are damaged wiring, a faulty brake servo pressure sensor, or a poor electrical connection in the sensor circuit.

4. Can I drive my Volkswagen with the P1913 code?

Driving with this code is not recommended, as it may impact braking performance and safety. Address the issue as soon as possible.

5. How do I diagnose the P1913 code on a Volkswagen?

Start by inspecting the brake servo pressure sensor wiring for damage or corrosion, test the sensor with a multimeter, and check the corresponding fuses and connectors.

6. How is the P1913 code fixed on a Volkswagen?

Repairs may include replacing the brake servo pressure sensor, repairing or replacing damaged wiring, or cleaning and securing electrical connections.

7. How much does it cost to fix a P1913 code on a Volkswagen?

The repair cost can vary but typically ranges from $100 to $300, depending on whether the issue is with the sensor, wiring, or labor charges.

8. Can a low battery cause the P1913 code on a Volkswagen?

While unlikely, a weak or low battery might contribute to electrical issues. Ensure the battery is fully charged and in good condition before further diagnostics.

9. Does the P1913 code always mean the sensor is bad?

No, the issue could also be caused by damaged wiring, corroded connectors, or a blown fuse, so thorough diagnostics are necessary.

10. What tools are needed to troubleshoot code P1913 on a Volkswagen?

You'll need an OBDII scanner, a multimeter for testing electrical circuits, and basic tools to inspect and repair the sensor and wiring.

Discuss the causes and fixes for P1913 Volkswagen OBDII Code

Code P1913 Volkswagen comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play