AutoCodes – Audi – P1913 Audi

P1913 Audi Code - Brake Servo Pressure Sensor Short To Ground

Quick Answer

P1913 Audi indicates Brake Servo Pressure Sensor Short To Ground. Common causes include Faulty Brake Servo Pressure Sensor, Brake Servo Pressure Sensor harness is open or shorted, Brake Servo Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1913 Audi indicates Brake Servo Pressure Sensor Short To Ground.
Common causes: Common causes include Faulty Brake Servo Pressure Sensor, Brake Servo Pressure Sensor harness is open or shorted, Brake Servo Pressure Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,772

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 27, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1913 Audi Description

OBDII Code P1913 Audi - Brake Servo Pressure Sensor Short To Ground - AutoCodes.com — P1913 Audi Code - Brake Servo Pressure Sensor Short To Ground

What does this mean?

What are the Possible Causes of the DTC P1913 Audi?

Faulty Brake Servo Pressure Sensor
Brake Servo Pressure Sensor harness is open or shorted
Brake Servo Pressure Sensor circuit poor electrical connection

How to Fix the DTC P1913 Audi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1913 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1913 Audi code?

Need more information on how to fix the P1913 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1913 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1913 Audi Code

1. What are the common symptoms of an OBDII code P1913 in an Audi related to the Brake Servo Pressure Sensor Short To Ground issue?

- Common symptoms include the brake warning light illuminating on the dashboard, loss of power brakes, and potential difficulty in braking.

2. What are the possible causes of the OBDII code P1913 Brake Servo Pressure Sensor Short To Ground in an Audi?

- The code may be triggered by a faulty brake servo pressure sensor, damaged wiring or connectors, or a short circuit to ground in the sensor circuit.

3. How can I diagnose the OBDII code P1913 in my Audi related to the Brake Servo Pressure Sensor Short To Ground issue?

- Diagnose by inspecting the sensor, checking for damaged wires or connectors, and performing a continuity test to identify a short circuit to ground.

4. Can I continue driving my Audi with the OBDII code P1913 related to the Brake Servo Pressure Sensor issue?

- It is not recommended to drive the vehicle with this issue as it can compromise brake functionality and safety. Immediate attention is necessary.

5. What are the repair options for addressing the OBDII code P1913 Brake Servo Pressure Sensor Short To Ground in an Audi?

- Repair options may include replacing the brake servo pressure sensor, repairing damaged wiring or connectors, and clearing the fault code with a diagnostic tool.

6. Is it possible to reset the OBDII code P1913 related to the Brake Servo Pressure Sensor issue without fixing the root cause?

- Clearing the fault code without fixing the underlying issue may temporarily turn off the warning light, but the problem will likely reoccur until properly addressed.

7. How critical is it to resolve the OBDII code P1913 Brake Servo Pressure Sensor Short To Ground in an Audi promptly?

- Resolving the issue promptly is crucial as it directly affects the proper functioning of the brake system, which is essential for vehicle safety.

8. Are there any preventive measures to avoid the OBDII code P1913 related to the Brake Servo Pressure Sensor issue in an Audi?

- Regular maintenance checks, including inspecting the brake system components and addressing any warning lights promptly, can help prevent such issues.

9. Can a DIY enthusiast with automotive knowledge fix the OBDII code P1913 Brake Servo Pressure Sensor Short To Ground issue in an Audi?

- Depending on the individual's skill level and access to tools, a DIY enthusiast may be able to address this issue by following repair guides and precautions.

10. How long does it typically take to repair the OBDII code P1913 Brake Servo Pressure Sensor Short To Ground issue in an Audi?

- The repair time can vary based on the extent of the issue and the repair method chosen. It may range from a quick sensor replacement to more extensive wiring repairs.