P1913 Code - Brake Servo Pressure Sensor Short To Ground
Quick Answer
P1913 indicates Brake Servo Pressure Sensor Short To Ground. Common causes include Faulty Brake Servo Pressure Sensor, Brake Servo Pressure Sensor harness is open or shorted, Brake Servo Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1913 indicates Brake Servo Pressure Sensor Short To Ground.
- Common causes
- Common causes include Faulty Brake Servo Pressure Sensor, Brake Servo Pressure Sensor harness is open or shorted, Brake Servo Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1913 Description
What are the Possible Causes of the DTC P1913?
- Faulty Brake Servo Pressure Sensor
- Brake Servo Pressure Sensor harness is open or shorted
- Brake Servo Pressure Sensor circuit poor electrical connection
How to Fix the DTC P1913?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1913 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1913 code?
Need more information on how to fix the P1913 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1913 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P1913 Audi — Brake Servo Pressure Sensor Short To Ground
- P1913 Volkswagen — Brake Servo Pressure Sensor Short To Ground
Frequently Asked Questions about P1913 Code
1. What does the OBDII code P1913 indicate?
The code P1913 indicates that there is a "Brake Servo Pressure Sensor Short To Ground," meaning the pressure sensor in the brake servo is experiencing an electrical short to the ground, disrupting its normal function.
2. What symptoms might I notice if my vehicle has the P1913 code?
Symptoms of the P1913 code can include a brake warning light on the dashboard, changes in brake pedal responsiveness, possible reduction in braking power, and in some cases, an activated ABS light.
3. What are common causes of the P1913 code?
Common causes for the P1913 code include damaged wiring or connectors leading to the brake servo pressure sensor, a faulty brake servo pressure sensor, or issues with the brake servo itself.
4. How can I diagnose the P1913 code?
Diagnosing the P1913 code typically involves using a scan tool to confirm the code, visually inspecting the wiring and connectors for damage, and checking the brake servo pressure sensor and related components for faults using a multimeter.
5. What are the steps to repair or resolve the P1913 code?
Repair steps for the P1913 code include replacing or repairing any damaged wires or connectors, replacing the faulty brake servo pressure sensor, and ensuring that the brake servo is functioning correctly. After repairs, it's important to clear the code from the OBD system and test drive the vehicle to ensure the issue is resolved.
6. Is it safe to drive with the P1913 code activated?
Driving with the P1913 code can be risky as it involves the braking system. If the vehicle shows any signs of impaired braking performance, it should be addressed immediately to ensure safety.
7. Can the P1913 code affect the vehicle's ABS system?
Yes, the P1913 code can potentially affect the ABS system since it involves the brake servo pressure sensor. Malfunctioning in this sensor can lead to incorrect signals being sent to the ABS, affecting its operation.
8. What tools are needed to confirm a P1913 code?
Tools needed to diagnose a P1913 code typically include an OBDII scanner, a digital multimeter, and basic hand tools for inspecting and repairing the electrical connections and components involved.
Discuss the causes and fixes for P1913 OBDII Code
Code P1913 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
