AutoCodes – Ford – P1900 2007 Ford Fusion

P1900 2007 Ford Fusion Code - Output Shaft Speed Circuit Intermittent Malfunction

Quick Answer

The Output Shaft Speed (OSS) sensor provides the Powertrain Control Module (PCM) with information about the rotational speed of an output shaft. Common causes include Output Shaft Speed (OSS) not installed properly, Faulty Output Shaft Speed sensor, Output Shaft Speed sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1900 2007 Ford Fusion indicates Output Shaft Speed Circuit Intermittent Malfunction.
Common causes: Common causes include Output Shaft Speed (OSS) not installed properly, Faulty Output Shaft Speed sensor, Output Shaft Speed sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,536

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 13, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1900 2007 Ford Fusion Description

The Output Shaft Speed (OSS) sensor provides the Powertrain Control Module (PCM) with information about the rotational speed of an output shaft. The PCM uses the information to control and diagnose powertrain behavior. In some applications, the sensor is also used as the source of vehicle speed. The sensor may be physically located in different places on the vehicle, depending upon the specific application. The design of each speed sensor is unique and depends on which powertrain control feature uses the information that is generated. The Diagnostic Trouble Code (DTC) will set when the OSS sensor signal to the PCM is irregular or interrupted.

OBDII Code P1900 2007 Ford Fusion - Output Shaft Speed Circuit Intermittent Malfunction - AutoCodes.com — P1900 2007 Ford Fusion Code - Output Shaft Speed Circuit Intermittent Malfunction

What does this mean?

What are the Possible Causes of the DTC P1900 2007 Ford Fusion?

Output Shaft Speed (OSS) not installed properly
Faulty Output Shaft Speed sensor
Output Shaft Speed sensor harness is open or shorted
Output Shaft Speed sensor circuit poor electrical connection

How to Fix the DTC P1900 2007 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1900 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1900 2007 Ford Fusion code?

Need more information on how to fix the P1900 2007 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1900 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1900 2007 Ford Fusion Code

1. What are the common symptoms of OBDII code P1900 in a 2007 Ford Fusion?

- Common symptoms include erratic shifting, harsh shifting, or the transmission going into limp mode.

2. What does the OBDII code P1900 indicate in a 2007 Ford Fusion?

- OBDII code P1900 signals an Output Shaft Speed Circuit Intermittent Malfunction in the vehicle's transmission system.

3. What are the possible causes of the Output Shaft Speed Circuit Intermittent Malfunction in a 2007 Ford Fusion?

- Possible causes include faulty wiring or connectors, a malfunctioning output shaft speed sensor, or issues with the transmission control module.

4. How can I diagnose the OBDII code P1900 in my 2007 Ford Fusion?

- Diagnosing the issue involves checking the wiring and connectors for any damage, testing the output shaft speed sensor, and scanning the transmission control module for fault codes.

5. Can I continue driving my 2007 Ford Fusion with the P1900 code present?

- It is not recommended to drive the vehicle with the P1900 code present, as it can lead to further damage to the transmission if left unresolved.

6. How can I repair the Output Shaft Speed Circuit Intermittent Malfunction in my 2007 Ford Fusion?

- Repairing the issue may involve repairing or replacing damaged wiring, connectors, or the output shaft speed sensor. In some cases, reprogramming the transmission control module may also be necessary.

7. Will resetting the OBDII code P1900 in my 2007 Ford Fusion make the issue go away?

- Resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing the Output Shaft Speed Circuit Intermittent Malfunction.

8. How much does it typically cost to repair the P1900 code in a 2007 Ford Fusion?

- Repair costs can vary depending on the specific cause of the issue, but it is recommended to consult a professional mechanic for an accurate diagnosis and cost estimate.

9. Can a DIY enthusiast fix the Output Shaft Speed Circuit Intermittent Malfunction in a 2007 Ford Fusion?

- While some aspects of the repair may be possible for experienced DIY enthusiasts, diagnosing and repairing transmission-related issues can be complex and may require specialized tools or knowledge.

10. Are there any preventative maintenance tips to avoid the OBDII code P1900 in a 2007 Ford Fusion?

- Regularly inspecting and maintaining the transmission system, including checking the wiring and connectors, can help prevent issues that may trigger the P1900 code.