P1864 Pontiac Code - Torque Converter Clutch Enable Solenoid Electrical Fault Conditions
Quick Answer
The Torque Converter Clutch (TCC) Solenoid Valve is an electrical device used with the TCC PWM Solenoid Valve in order to control the fluid acting on the TCC valve. Common causes include Faulty Torque Converter Clutch (TCC), Torque Converter Clutch (TCC) harness is open or shorted, Torque Converter Clutch (TCC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1864 Pontiac indicates Torque Converter Clutch Enable Solenoid Electrical Fault Conditions.
- Common causes
- Common causes include Faulty Torque Converter Clutch (TCC), Torque Converter Clutch (TCC) harness is open or shorted, Torque Converter Clutch (TCC) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1864 Pontiac Description
With the engine speed over 500 rpm for 5 seconds, not in Fuel Shut-off mode, the Powertrain Control Module (PCM) detects the Torque Converter Clutch (TCC) Solenoid Control voltage did not meet calibration (too high or too low). - Refer to the correct code repair chart in other manuals or media.
What are the Possible Causes of the DTC P1864 Pontiac?
- Faulty Torque Converter Clutch (TCC)
- Torque Converter Clutch (TCC) harness is open or shorted
- Torque Converter Clutch (TCC) circuit poor electrical connection
How to Fix the DTC P1864 Pontiac?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1864 Pontiac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1864 Pontiac code?
Need more information on how to fix the P1864 Pontiac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1864 Pontiac code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1864 Pontiac Code
1. What does the OBDII code P1864 mean on a Pontiac?
The P1864 code indicates an electrical fault in the Torque Converter Clutch (TCC) Enable Solenoid circuit, which can affect the transmission's ability to lock the torque converter.
2. What are the common symptoms of code P1864 in a Pontiac?
Symptoms may include poor fuel economy, harsh or delayed shifting, overheating transmission, the Check Engine Light illuminating, and a lack of torque converter lockup.
3. What causes the P1864 code to appear in a Pontiac?
Common causes include a faulty TCC solenoid, damaged wiring or connectors in the TCC circuit, transmission control module (TCM) issues, or low transmission fluid.
4. Can I drive my Pontiac with a P1864 code?
Driving with this code is possible but not recommended, as it can lead to poor performance, increased fuel consumption, and potential damage to the transmission if not addressed.
5. How do I diagnose the P1864 code on my Pontiac?
Diagnosis typically involves checking the TCC solenoid and related wiring for damage, inspecting the transmission fluid level and condition, and testing the transmission control module.
6. How much does it cost to fix a P1864 code on a Pontiac?
Repair costs can vary but typically range from $100 to $400, depending on whether the issue lies with the solenoid, wiring, or another component.
7. What tools are needed to troubleshoot the P1864 code?
You’ll need an OBDII scanner, a multimeter for testing electrical connections, and potentially a fluid pressure gauge to check transmission performance.
8. Can low transmission fluid cause the P1864 code in a Pontiac?
Yes, low or contaminated transmission fluid can lead to improper solenoid operation, triggering the P1864 code.
9. What is the role of the TCC solenoid in my Pontiac?
The TCC solenoid controls the locking and unlocking of the torque converter clutch to improve fuel efficiency and reduce transmission heat.
10. How can I prevent the P1864 code from recurring on my Pontiac?
Regularly check and maintain transmission fluid levels, inspect wiring for damage, and address any transmission issues promptly to prevent TCC solenoid faults.
Discuss the causes and fixes for P1864 Pontiac OBDII Code
Code P1864 Pontiac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
