AutoCodes – Nissan – P1805 2013 Nissan Rogue

P1805 2013 Nissan Rogue Code - Stop Lamp Switch

Quick Answer

The brake switch signal is applied to the Engine Control Module (ECM) through the stop lamp switch when the brake pedal is depressed. Common causes include Faulty Stop Lamp Switch, Stop Lamp Switch harness is open or shorted, Stop Lamp Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1805 2013 Nissan Rogue indicates Stop Lamp Switch.
Common causes
Common causes include Faulty Stop Lamp Switch, Stop Lamp Switch harness is open or shorted, Stop Lamp Switch circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,728
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 05, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1805 2013 Nissan Rogue Description

The brake switch signal is applied to the Engine Control Module (ECM) through the stop lamp switch when the brake pedal is depressed. This signal is used mainly to decrease the engine speed when the vehicle is driving. The Diagnostic Trouble Code (DTC) will be set when the ECM detects a faulty Stop Lamp Switch.
OBDII Code P1805 2013 Nissan Rogue - Stop Lamp Switch - AutoCodes.com
P1805 2013 Nissan Rogue Code - Stop Lamp Switch

What are the Possible Causes of the DTC P1805 2013 Nissan Rogue?

  • Faulty Stop Lamp Switch
  • Stop Lamp Switch harness is open or shorted
  • Stop Lamp Switch circuit poor electrical connection

How to Fix the DTC P1805 2013 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1805 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1805 2013 Nissan Rogue code?

Need more information on how to fix the P1805 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1805 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1805 2013 Nissan Rogue Code

1. What does the OBDII code P1805 on a 2013 Nissan Rogue indicate?

The P1805 code specifically pertains to an issue with the Stop Lamp Switch.

2. What are the common symptoms of a P1805 code in a 2013 Nissan Rogue?

Common symptoms include the brake lights not working properly, the vehicle's cruise control not engaging, and the inability to shift out of Park.

3. What causes the P1805 code to trigger in a 2013 Nissan Rogue?

The P1805 code is usually triggered by a malfunction in the Stop Lamp Switch, which is responsible for detecting when the brake pedal is pressed.

4. How can I diagnose the cause of a P1805 code in my 2013 Nissan Rogue?

To diagnose a P1805 code, you can start by checking the wiring and connections related to the Stop Lamp Switch, and testing the switch itself for proper functionality.

5. Can I still drive my 2013 Nissan Rogue with a P1805 code?

It is not recommended to drive your vehicle with a P1805 code as it can affect important safety features like the brake lights and cruise control.

6. How do I repair a P1805 code on my 2013 Nissan Rogue?

Repairing a P1805 code typically involves replacing the faulty Stop Lamp Switch with a new one and ensuring proper installation and adjustment.

7. Can I fix a P1805 code in my 2013 Nissan Rogue by resetting the OBDII system?

While clearing the code may temporarily turn off the warning light, it is important to address the underlying issue with the Stop Lamp Switch to prevent the code from reoccurring.

8. Are there any preventive measures to avoid the P1805 code in a 2013 Nissan Rogue?

Regularly checking and maintaining the brake system, including the Stop Lamp Switch, can help prevent issues that may trigger the P1805 code.

9. How much does it cost to replace a Stop Lamp Switch in a 2013 Nissan Rogue?

The cost of replacing a Stop Lamp Switch can vary depending on the labor rates and parts prices, but it is generally an affordable repair.

10. Can a DIY enthusiast replace the Stop Lamp Switch to resolve a P1805 code in a 2013 Nissan Rogue?

Replacing the Stop Lamp Switch can be a relatively straightforward DIY task for those with some mechanical knowledge and the right tools.

Discuss the causes and fixes for P1805 2013 Nissan Rogue OBDII Code

Code P1805 2013 Nissan Rogue comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play