P1805 2007 Nissan Maxima Code - Stop Lamp Switch
Quick Answer
The brake switch signal is applied to the Engine Control Module (ECM) through the stop lamp switch when the brake pedal is depressed. Common causes include Faulty Stop Lamp Switch, Stop Lamp Switch harness is open or shorted, Stop Lamp Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1805 2007 Nissan Maxima indicates Stop Lamp Switch.
- Common causes
- Common causes include Faulty Stop Lamp Switch, Stop Lamp Switch harness is open or shorted, Stop Lamp Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1805 2007 Nissan Maxima Description
What are the Possible Causes of the DTC P1805 2007 Nissan Maxima?
- Faulty Stop Lamp Switch
- Stop Lamp Switch harness is open or shorted
- Stop Lamp Switch circuit poor electrical connection
How to Fix the DTC P1805 2007 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1805 2007 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1805 2007 Nissan Maxima code?
Need more information on how to fix the P1805 2007 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1805 2007 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1805 2007 Nissan Maxima Code
1. What does OBDII code P1805 on a 2007 Nissan Maxima indicate?
The OBDII code P1805 on a 2007 Nissan Maxima specifically points to an issue with the Stop Lamp Switch.
2. What are the common symptoms of a faulty Stop Lamp Switch triggering code P1805 on a 2007 Nissan Maxima?
Common symptoms include the brake lights staying on constantly, the inability to shift out of park, and the illumination of the brake warning light on the dashboard.
3. What are the possible causes of OBDII code P1805 on a 2007 Nissan Maxima?
The most likely cause of this code is a malfunctioning or misadjusted Stop Lamp Switch, which is responsible for activating the brake lights when the brake pedal is pressed.
4. How can I diagnose a faulty Stop Lamp Switch triggering code P1805 on my 2007 Nissan Maxima?
You can check the functionality of the Stop Lamp Switch by examining the brake light operation when the brake pedal is pressed. A visual inspection of the switch and its wiring for any visible damage is also recommended.
5. Can a faulty Stop Lamp Switch causing code P1805 on a 2007 Nissan Maxima be repaired?
Yes, in most cases, replacing the defective Stop Lamp Switch will resolve the issue. Ensure the new switch is properly adjusted to activate the brake lights when the brake pedal is pressed.
6. Are there any DIY tips for fixing OBDII code P1805 related to the Stop Lamp Switch on a 2007 Nissan Maxima?
If you are comfortable with basic automotive repairs, replacing the Stop Lamp Switch is a relatively straightforward task. Refer to the vehicle's service manual for specific instructions.
7. Is it safe to continue driving with OBDII code P1805 caused by a faulty Stop Lamp Switch on a 2007 Nissan Maxima?
It is not recommended to drive with this issue as it can affect the proper operation of the brake lights, potentially compromising your safety on the road.
8. How much does it typically cost to replace a faulty Stop Lamp Switch triggering code P1805 on a 2007 Nissan Maxima?
The cost of replacing the Stop Lamp Switch can vary depending on the brand of the part and labor costs. On average, you can expect to pay between $50 to $100 for the switch itself, excluding labor charges.
9. Will resetting the OBDII system clear code P1805 related to the Stop Lamp Switch on a 2007 Nissan Maxima?
Resetting the OBDII system may temporarily clear the code, but if the underlying issue with the Stop Lamp Switch is not addressed, the code is likely to reappear after driving the vehicle.
10. Can a faulty Stop Lamp Switch triggering code P1805 on a 2007 Nissan Maxima cause other problems with the vehicle?
While the primary concern with this issue is related to brake light operation, a faulty Stop Lamp Switch can potentially lead to difficulties shifting out of park or other electrical issues in the vehicle.
Discuss the causes and fixes for P1805 2007 Nissan Maxima OBDII Code
Code P1805 2007 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
