AutoCodes – Nissan – P1800 2008 Nissan Maxima

P1800 2008 Nissan Maxima Code - Variable Intake Air System Control Solenoid Valve Circuit

Quick Answer

When the engine is running at low or medium speed, the power valve is fully closed. Common causes include Faulty Variable Intake Air System (VIAS) Control Solenoid Valve, VIAS Control Solenoid Valve circuit harness is open or shorted, VIAS Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1800 2008 Nissan Maxima indicates Variable Intake Air System Control Solenoid Valve Circuit.
Common causes: Common causes include Faulty Variable Intake Air System (VIAS) Control Solenoid Valve, VIAS Control Solenoid Valve circuit harness is open or shorted, VIAS Control Solenoid Valve circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,922

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 29, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1800 2008 Nissan Maxima Description

When the engine is running at low or medium speed, the power valve is fully closed. Under this condition, the effective suction port length is equivalent to the total length of the intake manifold collector's suction port including the intake valve. This long suction port provides increased air intake which results in improved suction efficiency and higher torque generation.
The surge tank and one-way valve are provided. When the engine is running at high speed, the Engine Control Module (ECM) sends the signal to the Variable Intake Air System (VIAS) control solenoid valve. This signal introduces the intake manifold vacuum into the power valve actuator and therefore opens the power valve to two suction passages together in the collector.
Under this condition, the effective port length is equivalent to the length of the suction port provided independently for each cylinder. This shortened port length results in enhanced engine output with reduced suction resistance under high speeds.
The VIAS control solenoid valve cuts the intake manifold vacuum signal for power valve control. It responds to ON/OFF signals from the ECM. When the solenoid is off, the vacuum signal from the intake manifold is cut. When the ECM sends an ON signal the coil pulls the plunger downward and feeds the vacuum signal to the power valve actuator. The Diagnostic Trouble Code (DTC) will be set when an excessively low or high voltage signal is sent to ECM through the valve

OBDII Code P1800 2008 Nissan Maxima - Variable Intake Air System Control Solenoid Valve Circuit - AutoCodes.com — P1800 2008 Nissan Maxima Code - Variable Intake Air System Control Solenoid Valve Circuit

What does this mean?

What are the Possible Causes of the DTC P1800 2008 Nissan Maxima?

Faulty Variable Intake Air System (VIAS) Control Solenoid Valve
VIAS Control Solenoid Valve circuit harness is open or shorted
VIAS Control Solenoid Valve circuit poor electrical connection

How to Fix the DTC P1800 2008 Nissan Maxima?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1800 2008 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1800 2008 Nissan Maxima code?

Need more information on how to fix the P1800 2008 Nissan Maxima code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1800 2008 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1800 2008 Nissan Maxima Code

1. What are common symptoms of OBDII code P1800 on a 2008 Nissan Maxima?

The common symptoms of OBDII code P1800 on a 2008 Nissan Maxima include rough idling, poor engine performance, and a decrease in fuel efficiency.

2. What does OBDII code P1800 indicate on a 2008 Nissan Maxima?

OBDII code P1800 on a 2008 Nissan Maxima indicates an issue with the Variable Intake Air System Control Solenoid Valve Circuit.

3. What are possible causes of OBDII code P1800 on a 2008 Nissan Maxima?

Possible causes of OBDII code P1800 on a 2008 Nissan Maxima include a faulty Variable Intake Air System Control Solenoid Valve, wiring issues, or a problem with the engine control module.

4. How can I diagnose the Variable Intake Air System Control Solenoid Valve Circuit issue on a 2008 Nissan Maxima?

To diagnose the Variable Intake Air System Control Solenoid Valve Circuit issue on a 2008 Nissan Maxima, you can use a scan tool to read the OBDII code, check the wiring connections, and test the solenoid valve for proper functioning.

5. Can I drive my 2008 Nissan Maxima with OBDII code P1800?

It is not recommended to drive your 2008 Nissan Maxima with OBDII code P1800 as it can lead to further damage to the engine and decrease in performance.

6. How do I repair OBDII code P1800 on a 2008 Nissan Maxima?

To repair OBDII code P1800 on a 2008 Nissan Maxima, you may need to replace the Variable Intake Air System Control Solenoid Valve, repair any damaged wiring, or reprogram the engine control module.

7. Is it safe to ignore OBDII code P1800 on a 2008 Nissan Maxima?

Ignoring OBDII code P1800 on a 2008 Nissan Maxima can lead to poor engine performance, reduced fuel efficiency, and potential damage to other engine components. It is recommended to address the issue promptly.

8. How much does it cost to fix OBDII code P1800 on a 2008 Nissan Maxima?

The cost to fix OBDII code P1800 on a 2008 Nissan Maxima can vary depending on the exact cause of the issue, parts needed for repair, and labor costs. It is advisable to consult with a mechanic for an accurate estimate.

9. Can a DIY enthusiast repair OBDII code P1800 on a 2008 Nissan Maxima?

While some DIY enthusiasts may have the skills to diagnose and repair OBDII code P1800 on a 2008 Nissan Maxima, it is recommended to seek professional help to ensure the issue is properly addressed and resolved.

10. How can I prevent OBDII code P1800 from occurring on my 2008 Nissan Maxima?

To prevent OBDII code P1800 from occurring on your 2008 Nissan Maxima, it is essential to perform regular maintenance, such as checking for any signs of wear or damage to the Variable Intake Air System components, and addressing any issues promptly.