P1780 2011 Ford Fusion Code - Transmission Control Switch Circuit is Out of Self-Test Range
Quick Answer
The Transmission Control Switch (TCS) is a momentary contact switch that is located on the end of the transmission control selector lever. Common causes include Transmission Control Switch (TCS) not cycled during the self-test, Faulty Transmission Control Switch, Transmission Control Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1780 2011 Ford Fusion indicates Transmission Control Switch Circuit is Out of Self-Test Range.
- Common causes
- Common causes include Transmission Control Switch (TCS) not cycled during the self-test, Faulty Transmission Control Switch, Transmission Control Switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1780 2011 Ford Fusion Description
What are the Possible Causes of the DTC P1780 2011 Ford Fusion?
- Transmission Control Switch (TCS) not cycled during the self-test
- Faulty Transmission Control Switch
- Transmission Control Switch harness is open or shorted
- Transmission Control Switch circuit poor electrical connection
How to Fix the DTC P1780 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1780 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1780 2011 Ford Fusion code?
Need more information on how to fix the P1780 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1780 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1780 2011 Ford Fusion Code
1. What does the OBDII code P1780 mean on a 2011 Ford Fusion?
P1780 indicates that the Transmission Control Switch (TCS) circuit is out of the self-test range, typically related to the Overdrive Cancel Switch.
2. What are the symptoms of a P1780 code on a 2011 Ford Fusion?
Common symptoms include the Overdrive Cancel Switch not functioning, the Overdrive Off light staying on or not illuminating, and potential issues with shifting performance.
3. What causes the P1780 code in a 2011 Ford Fusion?
The most common causes include a faulty Overdrive Cancel Switch, damaged wiring in the TCS circuit, or a malfunctioning Powertrain Control Module (PCM).
4. Can a P1780 code affect transmission performance on a 2011 Ford Fusion?
Yes, it can cause shifting issues or prevent the transmission from entering Overdrive, affecting fuel efficiency and drivability.
5. How is the P1780 code diagnosed in a 2011 Ford Fusion?
A mechanic will inspect the Overdrive Cancel Switch, check the wiring and connections in the TCS circuit, and use a scan tool to monitor the switch's input to the PCM.
6. Can I still drive my 2011 Ford Fusion with a P1780 code?
While the car may still be drivable, avoiding Overdrive can reduce fuel efficiency, and a persistent issue could lead to further transmission problems.
7. How do you fix a P1780 code on a 2011 Ford Fusion?
Repairs typically involve replacing the Overdrive Cancel Switch, repairing or replacing damaged wiring, or reprogramming or replacing the PCM if necessary.
8. How much does it cost to repair a P1780 code on a 2011 Ford Fusion?
The cost varies, but replacing the Overdrive Cancel Switch typically costs $100-$250, while wiring repairs or PCM replacement can be more expensive.
9. Can a dead battery or low voltage cause a P1780 code in a 2011 Ford Fusion?
Low voltage might cause electrical issues that trigger the code, but it's more commonly related to a specific fault in the TCS circuit.
10. How do I prevent a P1780 code from recurring in my 2011 Ford Fusion?
Regularly inspect and maintain the transmission wiring and switches, and address any shifting or electrical issues promptly to avoid further damage.
Discuss the causes and fixes for P1780 2011 Ford Fusion OBDII Code
Code P1780 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
