AutoCodes – Buick – P1761 Buick

P1761 Buick Code - Up and Down Shift Switch Signal Circuit

Quick Answer

The Driver Shift Request (DSR), also known as the TAP Up/Downshift manual shift function, allows the driver to select the desired range of gears for current driving conditions. Common causes include Faulty Control Solenoid Valve Assembly, Control Solenoid Valve Assembly harness is open or shorted, Control Solenoid Valve Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1761 Buick indicates Up and Down Shift Switch Signal Circuit.
Common causes: Common causes include Faulty Control Solenoid Valve Assembly, Control Solenoid Valve Assembly harness is open or shorted, Control Solenoid Valve Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 786

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 29, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1761 Buick Description

The Driver Shift Request (DSR), also known as the TAP Up/Downshift manual shift function, allows the driver to select the desired range of gears for current driving conditions. The DSR shift system is activated when the gear selector is in the manual position. The DSR system is deactivated in all other range positions. When DSR is selected, a signal is sent to the Body Control Module (BCM) and also to the Transmission Control Module (TCM). Each time a signal is sent, an internal counter in the BCM and TCM increments. Both counters must have the same value. This Diagnostic Trouble Code (DTC) sets when the rolling count value of the TCM does not match the same rolling count value sent from the BCM.

OBDII Code P1761 Buick - Up and Down Shift Switch Signal Circuit - AutoCodes.com — P1761 Buick Code - Up and Down Shift Switch Signal Circuit

What does this mean?

What are the Possible Causes of the DTC P1761 Buick?

Faulty Control Solenoid Valve Assembly
Control Solenoid Valve Assembly harness is open or shorted
Control Solenoid Valve Assembly circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC P1761 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1761 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1761 Buick code?

Need more information on how to fix the P1761 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1761 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1761 Buick Code

1. What are the common symptoms of OBDII code P1761 in a Buick related to the Up and Down Shift Switch Signal Circuit?

- Common symptoms include harsh shifting, erratic shifting patterns, and potential transmission slipping.

2. What are the possible causes of OBDII code P1761 in a Buick?

- The code may be triggered by a faulty up and down shift switch signal circuit, damaged wiring, a defective shift solenoid, or issues with the transmission control module.

3. How can I diagnose the cause of OBDII code P1761 in a Buick?

- Diagnosis typically involves using a scan tool to check for the specific fault code, testing the shift solenoids and related circuits, and inspecting the wiring for any damage or loose connections.

4. Can OBDII code P1761 in a Buick be repaired at home?

- While some DIY enthusiasts may attempt to repair this code themselves, it is recommended to consult with a professional mechanic or dealership due to the complexity of transmission-related issues.

5. What are the repair options for fixing OBDII code P1761 in a Buick?

- Repair options may include replacing the faulty shift solenoid, repairing damaged wiring, resetting the transmission control module, or reprogramming the TCM to address the issue.

6. Is it safe to continue driving my Buick with OBDII code P1761 present?

- It is not recommended to continue driving your Buick with this code present, as it can lead to further transmission damage and potential safety hazards on the road.

7. How much does it typically cost to repair OBDII code P1761 in a Buick?

- The cost of repairing this code can vary depending on the specific cause of the issue, but it may range from a couple of hundred dollars for minor repairs to over a thousand dollars for more extensive repairs.

8. Can a simple reset of the system clear OBDII code P1761 in a Buick?

- A simple reset may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear once the system detects the fault again.

9. Are there any preventive maintenance measures to avoid OBDII code P1761 in a Buick?

- Regular transmission fluid checks and changes, as well as keeping up with scheduled maintenance, can help prevent issues that may lead to OBDII code P1761 in a Buick.

10. Will OBDII code P1761 cause my Buick to go into "limp mode"?

- In some cases, this code can trigger the transmission to go into a "limp mode" to protect the system from further damage, limiting the vehicle's speed and functionality until the issue is resolved.