AutoCodes – Ford – P1703 2011 Ford Fusion

P1703 2011 Ford Fusion Code - Brake On/Off Switch Out of Self-Test Range

Quick Answer

Indicates that during the Key On Engine Off (KOEO) self-test, the Brake Pedal Position (BPD) signal was high, or during the Key ON Engine Running (KOER) self-test, the BPP signal di not cycle high and low. Common causes include Brake Pedal Position Switch harness is open or shorted, Brake Pedal Position Switch circuit poor electrical connection, Damage Brake Switch. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1703 2011 Ford Fusion indicates Brake On/Off Switch Out of Self-Test Range.
Common causes: Common causes include Brake Pedal Position Switch harness is open or shorted, Brake Pedal Position Switch circuit poor electrical connection, Damage Brake Switch.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,805

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 08, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1703 2011 Ford Fusion Description

OBDII Code P1703 2011 Ford Fusion - Brake On/Off Switch Out of Self-Test Range - AutoCodes.com — P1703 2011 Ford Fusion Code - Brake On/Off Switch Out of Self-Test Range

What does this mean?

What are the Possible Causes of the DTC P1703 2011 Ford Fusion?

Brake Pedal Position Switch harness is open or shorted
Brake Pedal Position Switch circuit poor electrical connection
Damage Brake Switch
Misadjusted Brake Switch

How to Fix the DTC P1703 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Check for correct function of the stop lamps, if the stop lamps are not working change the brake switch.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1703 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1703 2011 Ford Fusion code?

Need more information on how to fix the P1703 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1703 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1703 2011 Ford Fusion Code

1. What are the common symptoms of OBDII code P1703 on a 2011 Ford Fusion?

The common symptoms of P1703, Brake On/Off Switch Out of Self-Test Range, may include issues with the brake lights, cruise control not working, or the vehicle not shifting properly.

2. What causes the OBDII code P1703 to trigger on a 2011 Ford Fusion?

The P1703 code on a 2011 Ford Fusion is typically triggered when the brake on/off switch is detected to be out of the self-test range. This could be due to a faulty brake switch or a wiring issue.

3. How can I diagnose the Brake On/Off Switch Out of Self-Test Range error code on my 2011 Ford Fusion?

To diagnose the P1703 code, you can start by checking the brake light operation, testing the brake switch with a multimeter, and inspecting the wiring for any damage or corrosion.

4. Can I still drive my 2011 Ford Fusion with the P1703 code present?

It is not recommended to drive your Ford Fusion with the P1703 code active, as it can affect the proper functioning of the brake lights and other critical systems like the transmission.

5. How can I repair the Brake On/Off Switch Out of Self-Test Range issue on my 2011 Ford Fusion?

The repair for P1703 on a 2011 Ford Fusion usually involves replacing the faulty brake switch or repairing any damaged wiring associated with the switch.

6. Will resetting the OBDII code P1703 on my 2011 Ford Fusion make it go away permanently?

Resetting the P1703 code may clear it temporarily, but if the underlying issue with the brake switch or wiring is not addressed, the code is likely to reappear.

7. Can a DIY enthusiast fix the P1703 code on a 2011 Ford Fusion?

Depending on your experience and tools available, a DIY enthusiast can attempt to fix the P1703 code by replacing the brake switch or repairing the wiring, but professional help is recommended for accurate diagnosis.

8. Is the Brake On/Off Switch Out of Self-Test Range error code a common issue on 2011 Ford Fusions?

The P1703 code is not extremely common on 2011 Ford Fusions, but it can still occur due to wear and tear on the brake switch or wiring issues over time.

9. What are the potential risks of ignoring the P1703 code on my 2011 Ford Fusion?

Ignoring the P1703 code can lead to safety risks due to malfunctioning brake lights, potential transmission issues, and loss of critical functions like cruise control.

10. How long does it typically take to repair the P1703 code on a 2011 Ford Fusion?

The repair time for the P1703 code on a 2011 Ford Fusion can vary depending on the exact cause of the issue, but it may take anywhere from 30 minutes to a couple of hours for a professional technician to diagnose and fix the problem.