AutoCodes – Chevrolet – P1682 2014 Chevrolet Silverado

P1682 2014 Chevrolet Silverado Code - Ignition 1 Switch Circuit 2

Quick Answer

There are 2 ignition 1 voltage circuits supplied to the Engine Control Module (ECM). Common causes include Faulty ignition switch, Ignition Switch harness is open or shorted, Ignition Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1682 2014 Chevrolet Silverado indicates Ignition 1 Switch Circuit 2.
Common causes: Common causes include Faulty ignition switch, Ignition Switch harness is open or shorted, Ignition Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,814

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 11, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1682 2014 Chevrolet Silverado Description

There are 2 ignition 1 voltage circuits supplied to the Engine Control Module (ECM). The first ignition circuit is provided by the powertrain relay, through a fuse. This ignition 1 voltage circuit supplies power to all the internal ECM circuits associated with the throttle actuator control (TAC) operation. The second ignition 1 voltage circuit is supplied by the run/crank relay through a fuse and is used to power the remaining internal ECM circuits. If the ECM detects a voltage difference between the 2 ignition 1 voltage circuits, DTC P1682 will set.

OBDII Code P1682 2014 Chevrolet Silverado - Ignition 1 Switch Circuit 2 - AutoCodes.com — P1682 2014 Chevrolet Silverado Code - Ignition 1 Switch Circuit 2

What does this mean?

What are the Possible Causes of the DTC P1682 2014 Chevrolet Silverado?

Faulty ignition switch
Ignition Switch harness is open or shorted
Ignition Switch circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P1682 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a Factory Service Bulletin for the following Chevrolet models:
2016-2018 Chevrolet Silverado 1500
2019 Chevrolet Silverado LD
Dead Battery / P1682 P129D P10E4 P2535 / Crank No Start

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1682 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1682 2014 Chevrolet Silverado code?

Need more information on how to fix the P1682 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1682 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1682 2014 Chevrolet Silverado Code

What does the OBDII code P1682 mean on a 2014 Chevrolet Silverado?

P1682 indicates an issue with the Ignition 1 Switch Circuit 2, which may cause problems with starting or maintaining power to the vehicle's ignition system.

What are the common symptoms of code P1682 on a 2014 Chevrolet Silverado?

Symptoms include a no-start condition, intermittent stalling, reduced engine performance, or the Check Engine Light turning on.

What causes code P1682 on a 2014 Chevrolet Silverado?

Common causes include a faulty ignition switch, damaged wiring or connectors, or issues with the powertrain control module (PCM).

Can a bad ignition switch cause the P1682 code?

Yes, a bad ignition switch is a primary cause of the P1682 code, as it can disrupt the circuit responsible for powering the ignition system.

How can I diagnose the P1682 code on my 2014 Chevrolet Silverado?

Use an OBDII scanner to confirm the code, inspect the ignition switch and related wiring for damage, and test the circuit using a multimeter to identify faults.

Is it safe to drive with the P1682 code on a 2014 Chevrolet Silverado?

Driving with this code is not recommended, as it can lead to intermittent stalling or a no-start condition, potentially leaving you stranded.

How do I fix the P1682 code on a 2014 Chevrolet Silverado?

Repairs may include replacing the ignition switch, repairing damaged wires or connectors, or reprogramming or replacing the PCM if necessary.

How much does it cost to fix the P1682 code on a 2014 Chevrolet Silverado?

The repair cost varies but may range from $150 to $500, depending on whether the ignition switch, wiring, or PCM needs repair or replacement.

Can a dead battery trigger the P1682 code?

While unlikely, a weak or dead battery can cause electrical issues that mimic symptoms of this code, so itâ€™s worth testing the battery and charging system.

Does the P1682 code require reprogramming the PCM?

In some cases, if the PCM is faulty or corrupted, reprogramming or replacing it may be necessary to resolve the P1682 code.