AutoCodes – Isuzu – P1681 Isuzu

P1681 Isuzu Code - Automotic Transmission To Engine Control Module Signal 'A' Input Low

Quick Answer

P1681 Isuzu indicates Automotic Transmission To Engine Control Module Signal 'A' Input Low. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1681 Isuzu indicates Automotic Transmission To Engine Control Module Signal 'A' Input Low.
Common causes: Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,783

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 09, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1681 Isuzu Description

OBDII Code P1681 Isuzu - Automotic Transmission To Engine Control Module Signal 'A' Input Low - AutoCodes.com — P1681 Isuzu Code - Automotic Transmission To Engine Control Module Signal 'A' Input Low

What does this mean?

What are the Possible Causes of the DTC P1681 Isuzu?

Faulty Engine Control Module (ECM)
Engine Control Module (ECM) harness is open or shorted
Engine Control Module (ECM) circuit poor electrical connection

How to Fix the DTC P1681 Isuzu?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1681 Isuzu code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1681 Isuzu code?

Need more information on how to fix the P1681 Isuzu code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1681 Isuzu code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1681 Isuzu Code

1. What are the common symptoms of OBDII code P1681 in an Isuzu related to the Automatic Transmission to Engine Control Module Signal 'A' Input Low?

- Common symptoms include issues with shifting gears, transmission slipping, poor fuel efficiency, and the vehicle going into limp mode.

2. What are the possible causes of OBDII code P1681 in an Isuzu?

- Possible causes include a faulty transmission control module (TCM), damaged wiring or connectors between the TCM and engine control module (ECM), or a malfunctioning ECM.

3. How can I diagnose the OBDII code P1681 in my Isuzu?

- Diagnosing this code typically involves using a scan tool to retrieve the fault codes, checking the wiring and connectors for any damage or corrosion, and testing the TCM and ECM for proper operation.

4. Can driving with OBDII code P1681 in an Isuzu cause further damage?

- Continuing to drive with this code present can potentially cause damage to the transmission or other engine components, so it is recommended to address the issue promptly.

5. What are some repair tips for fixing OBDII code P1681 in an Isuzu?

- Repair tips may include repairing or replacing any damaged wiring or connectors, reprogramming the TCM or ECM if necessary, or replacing the faulty module causing the communication issue.

6. Is it safe to continue driving my Isuzu with OBDII code P1681 present?

- It is not recommended to continue driving your Isuzu with this code present, as it can lead to further damage or safety hazards. It is best to address the issue as soon as possible.

7. How much does it typically cost to repair OBDII code P1681 in an Isuzu?

- The cost of repairing this code can vary depending on the specific cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

8. Can I reset the OBDII code P1681 in my Isuzu using a scan tool?

- Resetting the code with a scan tool may temporarily clear the error code, but if the underlying issue is not addressed, the code is likely to reappear after some driving cycles.

9. Will OBDII code P1681 cause my Isuzu to fail an emissions test?

- Yes, having this code present can cause your Isuzu to fail an emissions test, as it indicates a problem with the transmission-to-ECM communication, which can impact the vehicle's emissions.

10. How urgent is it to fix OBDII code P1681 in an Isuzu?

- It is recommended to address this code promptly to prevent further damage to the vehicle's transmission or other components and ensure safe and efficient operation of the vehicle.