AutoCodes – Audi – P1680 Audi

P1680 Audi Code - Limp-Home Mode Active

Quick Answer

Throttle control unit incorporates the following components: Throttle Position (TP) sensor, CTP switch (if fitted), ISC actuator/position sensor or throttle motor/position sensor. Common causes include Faulty Throttle Control Unit, Throttle Control Unit harness is open or shorted, Throttle Control Unit circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1680 Audi indicates Limp-Home Mode Active.
Common causes
Common causes include Faulty Throttle Control Unit, Throttle Control Unit harness is open or shorted, Throttle Control Unit circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,842
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 08, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1680 Audi Description

Throttle control unit incorporates the following components: Throttle Position (TP) sensor, CTP switch (if fitted), ISC actuator/position sensor or throttle motor/position sensor.
OBDII Code P1680 Audi - Limp-Home Mode Active - AutoCodes.com
P1680 Audi Code - Limp-Home Mode Active

What are the Possible Causes of the DTC P1680 Audi?

  • Faulty Throttle Control Unit
  • Throttle Control Unit harness is open or shorted
  • Throttle Control Unit circuit poor electrical connection

How to Fix the DTC P1680 Audi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1680 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1680 Audi code?

Need more information on how to fix the P1680 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1680 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1680 Audi Code

1. What does the OBDII code P1680 on an Audi mean?

P1680 indicates that the vehicle has entered Limp-Home Mode due to a detected fault, limiting engine performance to protect vital components.

2. What are the common symptoms of code P1680 on an Audi?

Symptoms include reduced engine power, limited acceleration, a check engine light, and possibly rough idling or poor throttle response.

3. What causes the P1680 code on an Audi?

Common causes include issues with the throttle body, throttle position sensor, wiring or connectors, or a problem with the engine control module (ECM).

4. Can I drive my Audi with the P1680 code active?

While the car may still be drivable in Limp-Home Mode, it's important to address the issue promptly to avoid potential engine damage or further complications.

5. How do I diagnose the P1680 code on my Audi?

Start by scanning for additional codes, inspecting the throttle body and related wiring for damage, and checking the throttle position sensor functionality.

6. How can the P1680 code be fixed on an Audi?

Repairs may include cleaning or replacing the throttle body, fixing wiring or connector issues, or replacing the throttle position sensor or ECM if faulty.

7. Can a dirty throttle body cause the P1680 code on an Audi?

Yes, a dirty or clogged throttle body can disrupt airflow and trigger Limp-Home Mode, causing the P1680 code.

8. Will resetting the ECM clear the P1680 code on an Audi?

Resetting the ECM may clear the code temporarily, but the underlying issue needs to be resolved to prevent the code from reappearing.

9. How much does it cost to repair the P1680 code on an Audi?

Costs vary depending on the cause, ranging from $100 to $400 for throttle body cleaning or sensor replacement, with higher costs for ECM replacement.

10. Can a software update fix the P1680 code on an Audi?

In some cases, an ECM software update from the dealership can resolve issues related to Limp-Home Mode activation.

Discuss the causes and fixes for P1680 Audi OBDII Code

Code P1680 Audi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play