P1664 Audi Code - Injector Activation Current Circuit
Quick Answer
P1664 Audi indicates Injector Activation Current Circuit. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1664 Audi indicates Injector Activation Current Circuit.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1664 Audi Description
What are the Possible Causes of the DTC P1664 Audi?
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) harness is open or shorted
- Engine Control Module (ECM) circuit poor electrical connection
How to Fix the DTC P1664 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1664 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1664 Audi code?
Need more information on how to fix the P1664 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1664 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1664 Audi Code
1. What does the OBDII code P1664 mean for Audi vehicles?
P1664 indicates an issue with the Injector Activation Current Circuit, which controls the fuel injectors' electrical current.
2. What are the common symptoms of code P1664 in an Audi?
Symptoms may include poor engine performance, rough idling, misfires, loss of power, and difficulty starting the vehicle.
3. What causes OBDII code P1664 on Audi vehicles?
Common causes include a malfunctioning fuel injector, damaged wiring or connectors, or a faulty ECU.
4. Can a faulty fuel injector trigger code P1664?
Yes, a defective or clogged injector can disrupt the activation current circuit and cause this code.
5. How can wiring issues lead to a P1664 code in Audi vehicles?
Broken, corroded, or shorted wires in the injector circuit can prevent proper current flow, triggering the code.
6. Is it safe to drive an Audi with code P1664?
Driving with this code can lead to poor engine performance and increased fuel consumption. It's best to address it promptly.
7. How is code P1664 diagnosed on an Audi?
A mechanic will inspect the fuel injectors, wiring, connectors, and test the ECU for any faults using diagnostic tools.
8. What repairs can fix code P1664 on Audi vehicles?
Repairs may include replacing damaged wiring, connectors, or the affected injector, and reprogramming or replacing the ECU if needed.
9. Can a dirty fuel system cause code P1664 in an Audi?
Yes, dirt or debris in the fuel system can affect injector performance and lead to this code.
10. Will clearing the P1664 code fix the issue permanently?
Clearing the code may temporarily reset the warning, but the underlying problem must be repaired to prevent recurrence.
Discuss the causes and fixes for P1664 Audi OBDII Code
Code P1664 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
