P1650 2011 Ford Fusion Code - Power Steering Pressure Switch Out of Self-Test Range
Quick Answer
In the key ON engine OFF (KOEO) self-test, this code indicates the Power Steering Pressure (PSP) input to the Powertrain Control Module (PCM) is high. Common causes include Faulty Power Steering Pressure (PSP), Power Steering Pressure (PSP) harness is open or shorted, Power Steering Pressure (PSP) circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P1650 2011 Ford Fusion indicates Power Steering Pressure Switch Out of Self-Test Range.
- Common causes
- Common causes include Faulty Power Steering Pressure (PSP), Power Steering Pressure (PSP) harness is open or shorted, Power Steering Pressure (PSP) circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P1650 2011 Ford Fusion Description
What are the Possible Causes of the DTC P1650 2011 Ford Fusion?
- Faulty Power Steering Pressure (PSP)
- Power Steering Pressure (PSP) harness is open or shorted
- Power Steering Pressure (PSP) circuit poor electrical connection
- Damaged Powertrain Control Module (PCM)
How to Fix the DTC P1650 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1650 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1650 2011 Ford Fusion code?
Need more information on how to fix the P1650 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1650 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1650 2011 Ford Fusion Code
1. What does the OBDII code P1650 mean on a 2011 Ford Fusion?
P1650 indicates that the Power Steering Pressure (PSP) switch is out of the self-test range, meaning the switch is not providing expected feedback to the engine control module (ECM).
2. What are the symptoms of code P1650 in a 2011 Ford Fusion?
Common symptoms include difficulty steering at low speeds, inconsistent power steering assist, a check engine light, or reduced engine performance.
3. What causes the P1650 code in a Ford Fusion?
The code can be caused by a faulty power steering pressure switch, damaged wiring, a loose or corroded connector, or an issue with the ECM.
4. Can I still drive my 2011 Ford Fusion with the P1650 code?
While the car may still be drivable, it could have reduced power steering assist or other performance issues. It’s best to address the problem promptly to avoid further damage.
5. How do I diagnose the P1650 code on my Ford Fusion?
Start by inspecting the PSP switch and its wiring for damage or corrosion. Use a multimeter to test the switch and check for proper voltage signals. Scan the ECM for additional codes that might provide more context.
6. How do I fix the P1650 code in a 2011 Ford Fusion?
Depending on the cause, repairs may involve replacing the power steering pressure switch, repairing damaged wiring, cleaning corroded connectors, or reprogramming/replacing the ECM if necessary.
7. Where is the power steering pressure switch located on a 2011 Ford Fusion?
The PSP switch is typically located on the power steering line or pump, near the engine. Consult the vehicle’s service manual for the exact location.
8. How much does it cost to fix the P1650 code on a Ford Fusion?
Repair costs can range from $50 to $200 for parts and labor, depending on whether the issue is the switch, wiring, or ECM.
9. Can a faulty power steering pump cause the P1650 code?
While the pump itself isn’t usually the primary cause of P1650, issues with the pump could indirectly affect the pressure switch and trigger the code.
10. Will clearing the code with a scanner fix the P1650 issue?
Clearing the code will temporarily remove it, but if the underlying issue is not resolved, the code will return. Proper diagnosis and repair are necessary.
Discuss the causes and fixes for P1650 2011 Ford Fusion OBDII Code
Code P1650 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
