P1634 Audi Code - Accelerator Pedal Position Sensor 2 Signal High Input
Quick Answer
P1634 Audi indicates Accelerator Pedal Position Sensor 2 Signal High Input. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1634 Audi indicates Accelerator Pedal Position Sensor 2 Signal High Input.
- Common causes
- Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1634 Audi Description
What are the Possible Causes of the DTC P1634 Audi?
- Faulty Accelerator Pedal Position Sensor
- Accelerator Pedal Position Sensor harness is open or shorted
- Accelerator Pedal Position Sensor circuit poor electrical connection
How to Fix the DTC P1634 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1634 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1634 Audi code?
Need more information on how to fix the P1634 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1634 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1634 Audi Code
What does OBDII code P1634 mean on an Audi?
Code P1634 indicates a problem with the Accelerator Pedal Position Sensor 2, specifically that its signal is registering a high input, which is outside the expected range.
What are common symptoms of P1634 on an Audi?
Symptoms may include reduced engine performance, poor throttle response, the vehicle entering limp mode, and the check engine light being illuminated.
What causes the P1634 code to be triggered?
Common causes include a faulty accelerator pedal position sensor, damaged wiring or connectors, a malfunctioning throttle body, or issues with the engine control module (ECM).
Can I drive my Audi with the P1634 code?
While the car may still be drivable, it could experience reduced performance or limp mode. Continuing to drive without addressing the issue could lead to further damage.
How is the P1634 code diagnosed?
Diagnosis typically involves scanning for codes, inspecting the accelerator pedal position sensor, checking wiring and connectors for damage, and testing the sensor’s voltage output with a multimeter.
How do you fix the P1634 code on an Audi?
Repairs may include replacing the accelerator pedal position sensor, repairing or replacing damaged wiring or connectors, cleaning or replacing the throttle body, or reprogramming the ECM if necessary.
How much does it cost to fix code P1634 on an Audi?
Repair costs vary, but replacing the accelerator pedal position sensor typically costs between $150 and $300, including parts and labor. Wiring repairs or ECM reprogramming may incur additional costs.
Can a dirty throttle body cause the P1634 code?
Yes, a dirty or malfunctioning throttle body can sometimes cause issues with the accelerator pedal position sensor readings, potentially triggering the P1634 code.
Does the P1634 code always mean the sensor is bad?
No, the code could also be caused by wiring issues, connector problems, or even a failing ECM, so a thorough diagnosis is important.
Can clearing the code make the P1634 issue go away?
Clearing the code might temporarily turn off the check engine light, but if the underlying issue isn’t resolved, the code will likely return.
Discuss the causes and fixes for P1634 Audi OBDII Code
Code P1634 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
