P1632 MINI Code - Throttle Valve Adaptation Conditions Not Met
Quick Answer
The Electromotive Throttle Actuator is attached to the intake plenum and adjusts the throttle valve. Common causes include Faulty Electromotive Throttle Actuator, Electromotive Throttle Actuator harness is open or shorted, Electromotive Throttle Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1632 MINI indicates Throttle Valve Adaptation Conditions Not Met.
- Common causes
- Common causes include Faulty Electromotive Throttle Actuator, Electromotive Throttle Actuator harness is open or shorted, Electromotive Throttle Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1632 MINI Description
The Digital Motor Electronics opens or closes the electromotive throttle actuator electrically. The throttle valve opening angle in the electromotive throttle actuator is monitored by 2 hall effect sensors. The throttle valve is moved by an electric actuator motor. This servomotor is actuated by a pulse-width modulated signal with a frequency of 1000 Hz.
The Digital Motor Electronics diagnosis monitors compliance with marginal conditions during throttle adaptation. The Diagnostic Trouble Code (DTC) is detected when the vehicle voltage is less than 10 volts.
What are the Possible Causes of the DTC P1632 MINI?
- Faulty Electromotive Throttle Actuator
- Electromotive Throttle Actuator harness is open or shorted
- Electromotive Throttle Actuator circuit poor electrical connection
How to Fix the DTC P1632 MINI?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1632 MINI code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1632 MINI code?
Need more information on how to fix the P1632 MINI code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1632 MINI code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1632 MINI Code
1. What does the OBDII code P1632 mean on a MINI?
P1632 indicates that the throttle valve adaptation conditions were not met, meaning the engine control module (ECM) could not properly calibrate the throttle body.
2. What are common symptoms of the P1632 code in a MINI?
Symptoms may include poor acceleration, reduced engine performance, engine stalling, or the check engine light being illuminated.
3. What causes the P1632 code to appear in a MINI?
Common causes include a dirty or faulty throttle body, issues with the throttle position sensor (TPS), a weak battery, or wiring/connectivity problems in the throttle system.
4. Can a weak battery trigger the P1632 code on a MINI?
Yes, a weak or failing battery can cause voltage irregularities, which may prevent proper throttle adaptation and trigger the P1632 code.
5. How can I fix the P1632 code on my MINI?
Repairs may include cleaning or replacing the throttle body, checking and fixing wiring or connectors, replacing the throttle position sensor, or ensuring the battery is fully charged.
6. Is it safe to drive with the P1632 code on a MINI?
Driving with this code can be risky because it may cause unpredictable throttle response or engine stalling, which could lead to unsafe driving conditions.
7. Can a dirty throttle body cause the P1632 code on a MINI?
Yes, a dirty or clogged throttle body can prevent proper adaptation and result in the P1632 code being set.
8. How do you reset the throttle adaptation on a MINI?
Throttle adaptation can typically be reset using an OBDII scan tool or by following specific key-on procedures outlined in the MINI service manual.
9. Will clearing the P1632 code fix the problem permanently?
No, clearing the code without addressing the underlying issue will likely result in the code returning.
10. Do I need a professional mechanic to fix the P1632 code on my MINI?
While some issues, like cleaning the throttle body, can be done at home, diagnosing and repairing sensor or electrical problems may require a professional mechanic.
Discuss the causes and fixes for P1632 MINI OBDII Code
Code P1632 MINI comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
