AutoCodes – Buick – P1626 Buick

P1626 Buick Code - Theft Deterrent Fuel Enable Signal Not Received

Quick Answer

The Body Control Module (BCM) produces the theft deterrent fuel enable signal when the ignition is ON and the proper key resistor pellet is sensed. Common causes include Faulty ignition switch, Ignition switch harness is open or shorted, ignition switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1626 Buick indicates Theft Deterrent Fuel Enable Signal Not Received.
Common causes
Common causes include Faulty ignition switch, Ignition switch harness is open or shorted, ignition switch circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 20,054
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 01, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1626 Buick Description

The Body Control Module (BCM) produces the theft deterrent fuel enable signal when the ignition is ON and the proper key resistor pellet is sensed. The Powertrain Control Module (PCM) monitors the fuel enable signal during crank. If the proper signal is present on the theft deterrent fuel enable circuit, the PCM enables fuel delivery to allow the engine to start. If the PCM detects that the fuel enables signal is not present or incorrect while the engine is running, DTC P1626 will be set. DTC P1626 can cause a no-start condition or normal operation depending on when the loss of the fuel enable signal was detected. The engine will continue to start and run if the condition that set DTC P1626 occurred after the BCM sensed the proper key resistor pellet and signaled the PCM to continue fuel delivery. The engine will start and immediately stall if the condition that set DTC P1626 occurred before the BCM sensed the proper key resistor pellet. With this condition present, the PCM will inhibit fuel delivery and the BCM will disable the starter.
OBDII Code P1626 Buick - Theft Deterrent Fuel Enable Signal Not Received - AutoCodes.com
P1626 Buick Code - Theft Deterrent Fuel Enable Signal Not Received

What are the Possible Causes of the DTC P1626 Buick?

  • Faulty ignition switch
  • Ignition switch harness is open or shorted
  • ignition switch circuit poor electrical connection
  • Incorrect ignition key

How to Fix the DTC P1626 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1626 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1626 Buick code?

Need more information on how to fix the P1626 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1626 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1626 Buick Code

What does the OBDII code P1626 mean on a Buick?

Code P1626 indicates that the Theft Deterrent Fuel Enable signal was not received by the engine control module (ECM), which could prevent the engine from starting or running.

What are the common symptoms of code P1626 in a Buick?

Symptoms include the engine not starting, the security light staying illuminated on the dashboard, and the vehicle possibly stalling shortly after starting.

What causes the P1626 code to appear on a Buick?

Common causes include a faulty passlock sensor, damaged wiring in the theft deterrent system, a malfunctioning body control module (BCM), or communication issues between the BCM and ECM.

Can a weak or dead battery trigger the P1626 code?

Yes, a weak or dead battery can cause communication issues within the theft deterrent system, potentially triggering the P1626 code.

How do you troubleshoot the P1626 code on a Buick?

Check for other related codes, inspect the passlock sensor and wiring, ensure the battery is fully charged, and test communication between the BCM and ECM.

Can the P1626 code cause the engine to stall while driving?

Yes, if the theft deterrent system fails to send the Fuel Enable signal, the engine may stall or shut off while driving.

How do you fix the P1626 code on a Buick?

Repairs may include replacing the passlock sensor, fixing damaged wiring or connectors, reprogramming or replacing the BCM, or clearing the code after addressing the root cause.

Is the P1626 code specific to Buick vehicles?

No, while P1626 is common in Buicks, it can also appear in other GM vehicles with similar theft deterrent systems.

Can I bypass the theft deterrent system to resolve the P1626 code?

Bypassing the system is not recommended as it compromises vehicle security. It's better to repair the system to restore proper functionality.

How much does it cost to fix a P1626 code on a Buick?

Repair costs vary depending on the issue but can range from $100 to $500, including diagnostics, replacement parts, and labor.

Discuss the causes and fixes for P1626 Buick OBDII Code

Code P1626 Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play