P1624 MINI Code - MIL Request Signal Active
Quick Answer
P1624 MINI indicates MIL Request Signal Active. Common causes include Fault Codes stored in Transmission Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1624 MINI indicates MIL Request Signal Active.
- Common causes
- Common causes include Fault Codes stored in Transmission Control Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1624 MINI Description
What are the Possible Causes of the DTC P1624 MINI?
- Fault Codes stored in Transmission Control Module
How to Fix the DTC P1624 MINI?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1624 MINI code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1624 MINI code?
Need more information on how to fix the P1624 MINI code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1624 MINI code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1624 MINI Code
1. What does the OBDII code P1624 mean on a MINI?
P1624 indicates that the Engine Control Module (ECM) has detected a request from another module, such as the Transmission Control Module (TCM), to activate the Malfunction Indicator Light (MIL).
2. What are the common symptoms of code P1624 in a MINI?
Typical symptoms include the check engine light being illuminated and possible transmission performance issues, such as rough shifting or hesitation.
3. What causes the P1624 MIL Request Signal Active code?
This code is usually caused by an issue in another system, such as a transmission fault, sensor malfunction, or communication error between control modules.
4. Can I drive my MINI with the P1624 code?
While it may be possible to drive the vehicle, it’s not recommended as there could be underlying issues, especially with the transmission, that could worsen over time.
5. How do I diagnose the P1624 code on my MINI?
Start by scanning for additional codes in the system, particularly in the transmission control module, as P1624 is often a secondary code tied to another fault.
6. What tools are needed to fix the P1624 code on a MINI?
A professional OBDII scanner capable of reading MINI-specific codes and communication faults is essential for diagnosing the root cause of the issue.
7. How is the P1624 code typically fixed?
Repairs depend on the underlying issue but may involve addressing transmission faults, repairing damaged wiring or connectors, or updating software in the control modules.
8. Is the P1624 code specific to MINI vehicles?
No, the P1624 code can appear on other vehicle makes, but its meaning and diagnostics may vary slightly based on the manufacturer.
9. Does clearing the P1624 code fix the problem?
Clearing the code without addressing the underlying issue will not fix the problem, and the code is likely to reappear.
10. Can a faulty transmission cause the P1624 code to trigger?
Yes, transmission-related faults, such as solenoid issues or sensor malfunctions, are common causes of the P1624 code.
Discuss the causes and fixes for P1624 MINI OBDII Code
Code P1624 MINI comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
