AutoCodes – Isuzu – P1601 Isuzu

P1601 Isuzu Code - Engine Control Module Supply Voltage

Quick Answer

Battery positive voltage is supplied to the Engine Control Module (ECM) even when the ignition switch is OFF for use by the Diagnostic Trouble Code (DTC) memory and air–fuel ratio adaptive control value memory, etc. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1601 Isuzu indicates Engine Control Module Supply Voltage.
Common causes: Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,958

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 20, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1601 Isuzu Description

OBDII Code P1601 Isuzu - Engine Control Module Supply Voltage - AutoCodes.com — P1601 Isuzu Code - Engine Control Module Supply Voltage

What does this mean?

What are the Possible Causes of the DTC P1601 Isuzu?

Faulty Engine Control Module (ECM)
Engine Control Module (ECM) harness is open or shorted
Engine Control Module (ECM) circuit poor electrical connection

How to Fix the DTC P1601 Isuzu?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1601 Isuzu code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1601 Isuzu code?

Need more information on how to fix the P1601 Isuzu code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1601 Isuzu code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1601 Isuzu Code

1. What are the common symptoms of OBDII code P1601 in an Isuzu related to the Engine Control Module Supply Voltage?

- Common symptoms include engine stalling, rough idling, poor acceleration, and the illumination of the check engine light.

2. What are the possible causes of OBDII code P1601 in an Isuzu?

- Possible causes include a faulty Engine Control Module (ECM), wiring issues, a weak or dead battery, or a problem with the alternator.

3. How can I diagnose the cause of OBDII code P1601 in my Isuzu?

- To diagnose the issue, you can use a diagnostic scanner to retrieve the trouble codes and perform a thorough inspection of the ECM, battery, alternator, and related wiring.

4. Can a weak battery be the reason behind OBDII code P1601 in an Isuzu?

- Yes, a weak or failing battery can cause voltage irregularities that trigger code P1601. Ensure your battery is in good condition before further diagnosis.

5. Is it safe to continue driving with OBDII code P1601 present in my Isuzu?

- It is not recommended to keep driving with this code active, as it can lead to further damage to the engine control system. Have the issue diagnosed and repaired promptly.

6. How can I repair OBDII code P1601 in my Isuzu?

- Repair steps may include replacing the ECM, repairing or replacing damaged wiring, checking and charging the battery, and ensuring the alternator is functioning correctly.

7. Can a DIY enthusiast fix OBDII code P1601 in an Isuzu?

- While some troubleshooting steps can be done by a DIY enthusiast, diagnosing and repairing the root cause of the code may require advanced tools and expertise, so professional help is recommended.

8. Will resetting the trouble codes make OBDII code P1601 disappear in my Isuzu?

- Resetting the codes may temporarily turn off the check engine light, but if the underlying issue causing code P1601 is not fixed, the code will likely reappear after some driving cycles.

9. How can I prevent OBDII code P1601 from appearing in my Isuzu in the future?

- Regular maintenance of the battery, alternator, and electrical system can help prevent issues that lead to code P1601. Keeping your vehicle in good condition overall is key to avoiding such trouble codes.

10. Is it expensive to repair OBDII code P1601 in an Isuzu?

- The cost of repairing code P1601 can vary depending on the exact cause of the issue. Simple fixes like battery replacement may be relatively affordable, while ECM replacement can be more costly.