AutoCodes – Generic – P1599

P1599 Code - Engine Stall Or Near Stall Detected

Quick Answer

The Engine Control Module (ECM) has the ability to set a diagnostic trouble code (DTC) if the engine stalls when the ignition has not been turned OFF. Common causes for P1599 include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1599 indicates Engine Stall Or Near Stall Detected.
Common causes: Common causes for P1599 include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,709

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 20, 2019

Description
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1599 Description

The Engine Control Module (ECM) has the ability to set a diagnostic trouble code (DTC) if the engine stalls when the ignition has not been turned OFF. This DTC may aid in intermittent diagnosis of a customer complaint of intermittent engine stall. The scan tool Failure Record information can be duplicated under the same stall conditions in an attempt to reproduce the occurrence. Since DTC P1599 is a type D DTC, the ECM will not command the malfunction indicator lamp (MIL) ON. This DTC can set due to a driver error. For example, a vehicle equipped with a manual transaxle in which the clutch was release too quickly causing the engine to stall, will set DTC P1599.

OBDII Code P1599 - Engine Stall Or Near Stall Detected - AutoCodes.com — P1599 Code - Engine Stall Or Near Stall Detected

How to Fix the DTC P1599?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

This code only means that the engine stall. If the P1599 code is set with other codes, the other codes first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1599 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1599 code?

Need more information on how to fix the P1599 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1599 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P1599 Buick — Engine Stall Or Near Stall Detected
P1599 Cadillac — Engine Stall Or Near Stall Detected
P1599 Chevrolet — Engine Stall Or Near Stall Detected
P1599 Chrysler — A/C Pressure Sensor Low Input Conditions
P1599 Dodge — A/C Pressure Sensor Low Input Conditions
P1599 GMC — Engine Stall Or Near Stall Detected
P1599 Jeep — A/C Pressure Sensor Low Input Conditions
P1599 Saturn — Engine Stall Or Near Stall Detected

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1599 Code

1. What are common symptoms of OBDII code P1599?

- Common symptoms include engine stalling or near-stalling, rough idling, hesitation during acceleration, and potential loss of power.

2. What can cause OBDII code P1599 to trigger?

- The code P1599 is typically triggered by issues with the idle speed control system, such as a faulty idle air control valve, vacuum leaks, or throttle body problems.

3. How can I diagnose the cause of OBDII code P1599?

- Diagnosing the cause of code P1599 usually involves checking for vacuum leaks, testing the idle air control valve, inspecting the throttle body, and ensuring proper functioning of related sensors.

4. Can a dirty or clogged air filter cause OBDII code P1599?

- Yes, a dirty or clogged air filter can restrict airflow to the engine, affecting the idle speed control system and potentially triggering code P1599.

5. What are some repair tips for fixing OBDII code P1599?

- Repair tips may include cleaning or replacing the idle air control valve, fixing any vacuum leaks, cleaning the throttle body, checking and replacing the air filter if necessary, and ensuring all connections are secure.

6. Is it safe to continue driving with OBDII code P1599 present?

- It is not recommended to continue driving with code P1599, as it can lead to further engine performance issues and potential safety hazards due to unexpected stalling.

7. Can a malfunctioning oxygen sensor trigger OBDII code P1599?

- While a malfunctioning oxygen sensor can affect engine performance, it is not a common cause of OBDII code P1599 related to engine stall or near stall detected.

8. How do I reset OBDII code P1599 after making repairs?

- After making necessary repairs, you can reset the OBDII code P1599 using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes to clear the code.

9. Are there any recalls related to OBDII code P1599?

- Recalls related to code P1599 may vary depending on the vehicle make and model, so it is recommended to check with the manufacturer or authorized service center for any relevant recalls.

10. Can extreme weather conditions contribute to triggering OBDII code P1599?

- Extreme weather conditions, such as very hot or cold temperatures, can potentially exacerbate existing issues with the idle speed control system and contribute to triggering code P1599.