P1598 2016 GMC Sierra Code - Power Take Off Engine Speed Request Signal Message Counter Incorrect
Quick Answer
The Power Take-Off Control Module is constantly sending the Engine Control Module (ECM) serial data messages with information regarding its request for modifying engine speed. Common causes include Faulty Power Take-Off Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1598 2016 GMC Sierra indicates Power Take Off Engine Speed Request Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Power Take-Off Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1598 2016 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the Power Take-Off Control Module detects a fault in the serial data message between the Power Take-Off Control Module and the Engine Control Module.
What are the Possible Causes of the DTC P1598 2016 GMC Sierra?
- Faulty Power Take-Off Control Module
- Power Take-Off Control Module harness is open or shorted
- Power Take-Off Control Module circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1598 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1598 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1598 2016 GMC Sierra code?
Need more information on how to fix the P1598 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1598 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1598 2016 GMC Sierra Code
1. What are the common symptoms of OBDII code P1598 in a 2016 GMC Sierra?
The common symptoms of code P1598 include reduced engine performance, transmission shifting issues, and the illumination of the Check Engine Light.
2. What does the OBDII code P1598 "Power Take Off Engine Speed Request Signal Message Counter Incorrect" mean for a 2016 GMC Sierra?
The code indicates that the ECM has detected a discrepancy in the number of messages related to the power take-off engine speed request signal.
3. What are the possible causes of OBDII code P1598 in a 2016 GMC Sierra?
Potential causes of code P1598 include a faulty power take-off control module, wiring issues, a defective speed sensor, or a malfunctioning ECM.
4. How can I diagnose OBDII code P1598 in my 2016 GMC Sierra?
Diagnosing code P1598 involves checking the power take-off system components, inspecting wiring for damage, testing the speed sensor, and verifying proper ECM operation.
5. Can OBDII code P1598 in a 2016 GMC Sierra cause further damage if left unrepaired?
Continuing to drive with code P1598 unresolved may lead to more severe transmission or engine problems, reduced fuel efficiency, and potential safety risks.
6. Is it safe to continue driving my 2016 GMC Sierra with OBDII code P1598 present?
It is not recommended to drive the vehicle with an active P1598 code, as it may result in drivability issues and potential damage to other components.
7. How can I reset the Check Engine Light after repairing OBDII code P1598 in my 2016 GMC Sierra?
After fixing the underlying issue causing code P1598, you can reset the Check Engine Light using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes.
8. Are there any DIY repair tips for addressing OBDII code P1598 in a 2016 GMC Sierra?
While basic troubleshooting like checking for loose connections or damaged wiring can be done at home, diagnosing and repairing complex issues related to code P1598 may require professional assistance.
9. Will fixing OBDII code P1598 in my 2016 GMC Sierra improve overall vehicle performance?
Resolving code P1598 can restore normal engine and transmission operation, improve fuel efficiency, and prevent potential long-term damage to the vehicle's drivetrain components.
10. How much can I expect to pay for repairs related to OBDII code P1598 in a 2016 GMC Sierra?
The cost of repairs for code P1598 can vary depending on the underlying cause, but it may involve expenses for parts replacement, labor, and diagnostic services from a qualified mechanic or dealership.
Discuss the causes and fixes for P1598 2016 GMC Sierra OBDII Code
Code P1598 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
