P1572 2012 Ford Fusion Code - Brake Pedal Switch Circuit Malfunction
Quick Answer
Indicates that the brake input rationality test for Brake Pedal Position (BPP) and Brake Pressure Applied (BPA) switches has failed. Common causes include Faulty Brake Pedal Switch, Blown fuse, Brake Pedal Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1572 2012 Ford Fusion indicates Brake Pedal Switch Circuit Malfunction.
- Common causes
- Common causes include Faulty Brake Pedal Switch, Blown fuse, Brake Pedal Switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1572 2012 Ford Fusion Description
What are the Possible Causes of the DTC P1572 2012 Ford Fusion?
- Faulty Brake Pedal Switch
- Blown fuse
- Brake Pedal Switch harness is open or shorted
- Brake Pedal Switch circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P1572 2012 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1572 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1572 2012 Ford Fusion code?
Need more information on how to fix the P1572 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1572 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1572 2012 Ford Fusion Code
1. What are the common symptoms of OBDII code P1572 in a 2012 Ford Fusion?
- The common symptoms of code P1572 typically include issues with the brake lights staying on, difficulty shifting gears, and potential problems with the cruise control system.
2. What could cause the Brake Pedal Switch Circuit Malfunction in a 2012 Ford Fusion?
- The most common causes of the P1572 code in a 2012 Ford Fusion are a faulty brake pedal switch, damaged wiring or connectors in the brake pedal circuit, or a malfunctioning brake control module.
3. How can I diagnose the Brake Pedal Switch Circuit Malfunction in my 2012 Ford Fusion?
- To diagnose the P1572 code, you can start by checking the brake lights to see if they are functioning properly. You can also use an OBDII scanner to read the fault codes and inspect the brake pedal switch and its wiring for any visible damage.
4. Is it safe to drive my 2012 Ford Fusion with OBDII code P1572 active?
- It is generally not recommended to drive your vehicle with the P1572 code active, as it can lead to safety issues like the brake lights not working properly or the vehicle not shifting gears correctly. It's best to address the issue promptly.
5. Can I repair the Brake Pedal Switch Circuit Malfunction in my 2012 Ford Fusion myself?
- While some DIY enthusiasts may be able to replace a faulty brake pedal switch, diagnosing and repairing the underlying cause of the P1572 code may require specialized tools and expertise. It's advisable to consult a professional mechanic for proper diagnosis and repair.
6. How much does it typically cost to repair OBDII code P1572 in a 2012 Ford Fusion?
- The cost of repairing the P1572 code in a 2012 Ford Fusion can vary depending on the root cause of the issue. It may range from around $100 for a simple brake pedal switch replacement to a few hundred dollars for more complex repairs involving wiring or control module issues.
7. Will resetting the OBDII code P1572 in my 2012 Ford Fusion make it go away permanently?
- Resetting the P1572 code may temporarily clear the fault, but if the underlying issue causing the code is not addressed, it is likely to reappear. It's essential to diagnose and repair the root cause to prevent the code from coming back.
8. Can a malfunctioning brake pedal switch affect the overall performance of my 2012 Ford Fusion?
- Yes, a malfunctioning brake pedal switch can affect the overall performance of your vehicle by causing issues with the brake lights, cruise control system, and transmission shifting. It's crucial to address this issue promptly to ensure safe and proper vehicle operation.
9. Are there any preventive measures I can take to avoid OBDII code P1572 in my 2012 Ford Fusion?
- To prevent the P1572 code from appearing in your 2012 Ford Fusion, you can regularly check the brake lights for proper operation, inspect the brake pedal switch and wiring for any signs of damage, and address any issues promptly to avoid potential malfunctions.
10. Can a 2012 Ford Fusion fail an emissions test due to OBDII code P1572?
- Yes, if the P1572 code triggers the check engine light in your 2012 Ford Fusion, it may cause the vehicle to fail an emissions test. It's important to diagnose and repair the issue to ensure your vehicle meets emissions standards.
Discuss the causes and fixes for P1572 2012 Ford Fusion OBDII Code
Code P1572 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
