AutoCodes – Nissan – P1572 2008 Nissan Maxima

P1572 2008 Nissan Maxima Code - Brake Pedal Switch Circuit Malfunction

Quick Answer

When the brake pedal is depressed, Automatic Speed Control Device (ASCD) brake switch is turned OFF and stop lamp switch is turned ON. Common causes include Faulty Brake Pedal Switch, Faulty stop lamp switch, Brake Pedal Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1572 2008 Nissan Maxima indicates Brake Pedal Switch Circuit Malfunction.
Common causes: Common causes include Faulty Brake Pedal Switch, Faulty stop lamp switch, Brake Pedal Switch harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,210

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 30, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1572 2008 Nissan Maxima Description

When the brake pedal is depressed, Automatic Speed Control Device (ASCD) brake switch is turned OFF and stop lamp switch is turned ON. The Engine Control Module (ECM) detects the state of the brake pedal by this input of two kinds (ON/OFF signal).

OBDII Code P1572 2008 Nissan Maxima - Brake Pedal Switch Circuit Malfunction - AutoCodes.com — P1572 2008 Nissan Maxima Code - Brake Pedal Switch Circuit Malfunction

What does this mean?

What are the Possible Causes of the DTC P1572 2008 Nissan Maxima?

Faulty Brake Pedal Switch
Faulty stop lamp switch
Brake Pedal Switch harness is open or shorted
Brake Pedal Switch circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P1572 2008 Nissan Maxima?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1572 2008 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1572 2008 Nissan Maxima code?

Need more information on how to fix the P1572 2008 Nissan Maxima code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1572 2008 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1572 2008 Nissan Maxima Code

1. What are the common symptoms of OBDII code P1572 in a 2008 Nissan Maxima?

- Common symptoms include the brake lights staying on or not working, the inability to shift out of Park, and the cruise control not working.

2. What causes the OBDII code P1572 Brake Pedal Switch Circuit Malfunction in a 2008 Nissan Maxima?

- The most common causes are a faulty brake pedal switch, a broken or misaligned brake pedal switch, or a damaged wiring harness connected to the brake pedal switch.

3. How can I diagnose the Brake Pedal Switch Circuit Malfunction in my 2008 Nissan Maxima?

- You can start by checking the brake lights to see if they are functioning correctly, then inspect the brake pedal switch for any visible damage or misalignment. Finally, use an OBDII scanner to retrieve the specific fault code.

4. Can I still drive my 2008 Nissan Maxima with the P1572 code?

- It is not recommended to drive your vehicle with the P1572 code as it can affect important safety features like the brake lights and the ability to shift gears.

5. How can I repair the Brake Pedal Switch Circuit Malfunction in my 2008 Nissan Maxima?

- The repair typically involves replacing the faulty brake pedal switch or repairing any damaged wiring connected to the switch. Ensure proper installation and calibration of the new switch.

6. Are there any DIY tips for fixing the P1572 code in a 2008 Nissan Maxima?

- If you are comfortable working on car electronics, you can attempt to replace the brake pedal switch yourself. Just make sure to disconnect the battery before starting any repair work.

7. Will resetting the OBDII code P1572 in my 2008 Nissan Maxima make it go away?

- Resetting the code may temporarily turn off the Check Engine Light, but the underlying issue causing the code will persist until properly diagnosed and repaired.

8. Can a faulty brake pedal switch cause other issues in my 2008 Nissan Maxima?

- Yes, a faulty brake pedal switch can lead to various problems, including non-functioning brake lights, an inability to shift gears, and the malfunctioning of cruise control.

9. How long does it take to replace a brake pedal switch in a 2008 Nissan Maxima?

- The replacement of a brake pedal switch typically takes around 30 minutes to an hour, depending on your experience with car repairs and the accessibility of the switch in your vehicle.

10. Is the Brake Pedal Switch Circuit Malfunction covered under warranty for a 2008 Nissan Maxima?

- The warranty coverage may vary, but typically, this type of repair falls under the vehicle's basic warranty if the car is still within the warranty period. Check with your dealership for specific details.