AutoCodesFord – P1550 2010 Ford Fusion

P1550 2010 Ford Fusion Code - Power Steering Pressure Sensor Malfunction

Quick Answer

The Power Steering Pressure (PSP) sensor input signal to the Powertrain Control Module (PCM) is continuously monitored. Common causes include Faulty Power Steering Pressure (PSP), PSP harness is open or shorted, PSP circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P1550 2010 Ford Fusion indicates Power Steering Pressure Sensor Malfunction.
Common causes
Common causes include Faulty Power Steering Pressure (PSP), PSP harness is open or shorted, PSP circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,342
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 29, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1550 2010 Ford Fusion Description

The Power Steering Pressure (PSP) sensor input signal to the Powertrain Control Module (PCM) is continuously monitored. The test fails when the signal falls out of a maximum or minimum calibrated range.
OBDII Code P1550 2010 Ford Fusion - Power Steering Pressure Sensor Malfunction - AutoCodes.com
P1550 2010 Ford Fusion Code - Power Steering Pressure Sensor Malfunction

What are the Possible Causes of the DTC P1550 2010 Ford Fusion?

  • Faulty Power Steering Pressure (PSP)
  • PSP harness is open or shorted
  • PSP circuit poor electrical connection
  • Faulty Powertrain Control Module (PCM)

How to Fix the DTC P1550 2010 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1550 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1550 2010 Ford Fusion code?

Need more information on how to fix the P1550 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1550 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1550 2010 Ford Fusion Code

1. What does the OBDII code P1550 mean on a 2010 Ford Fusion?

The P1550 code indicates a malfunction in the power steering pressure sensor, which monitors hydraulic pressure in the power steering system.

2. What are the common symptoms of a P1550 code on a 2010 Ford Fusion?

Symptoms can include difficulty steering, heavy or stiff steering, a power steering warning light, and occasionally poor fuel efficiency.

3. What causes the P1550 code on a 2010 Ford Fusion?

The code is typically caused by a faulty power steering pressure sensor, damaged wiring or connectors, or a malfunction in the power steering system.

4. Can I drive my 2010 Ford Fusion with the P1550 code?

While the vehicle may remain drivable, steering could become difficult, especially at low speeds, posing safety risks. It’s best to address the issue promptly.

5. How do I diagnose the P1550 code on a 2010 Ford Fusion?

Start by inspecting the power steering pressure sensor, wiring, and connectors for damage. Use a scan tool to monitor sensor data and confirm its operation.

6. How is the P1550 code fixed on a 2010 Ford Fusion?

The repair often involves replacing the power steering pressure sensor, repairing damaged wiring or connectors, or addressing other power steering system issues.

7. How much does it cost to fix the P1550 code on a 2010 Ford Fusion?

The cost can range from $150 to $300, depending on whether the sensor needs replacement or additional wiring repairs are required.

8. Can a faulty power steering pressure sensor affect fuel efficiency?

Yes, a malfunctioning sensor can disrupt engine load data, potentially causing reduced fuel efficiency.

9. Will clearing the P1550 code fix the issue on a 2010 Ford Fusion?

Clearing the code without addressing the underlying problem will not fix the issue, and the code is likely to return.

10. Can a P1550 code damage other components in my 2010 Ford Fusion?

If left unaddressed, the strain on the power steering system could lead to further wear or damage to components like the pump or steering rack.

Discuss the causes and fixes for P1550 2010 Ford Fusion OBDII Code

Code P1550 2010 Ford Fusion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play