AutoCodes – Mazda – P1506 Mazda

P1506 Mazda Code - Idle Air Control Overspeed Error

Quick Answer

The P1506 code is set when the Engine Control Module (ECM) detects engine idle speed that is greater than the desired rpm. Common causes include Faulty Idle Air Control (IAC) valve, Idle Air Control (IAC) valve harness is open or shorted, Idle Air Control (IAC) valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1506 Mazda indicates Idle Air Control Overspeed Error.
Common causes: Common causes include Faulty Idle Air Control (IAC) valve, Idle Air Control (IAC) valve harness is open or shorted, Idle Air Control (IAC) valve circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 16,673

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 25, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1506 Mazda Description

The P1506 code is set when the Engine Control Module (ECM) detects engine idle speed that is greater than the desired rpm.

OBDII Code P1506 Mazda - Idle Air Control Overspeed Error - AutoCodes.com — P1506 Mazda Code - Idle Air Control Overspeed Error

What does this mean?

What are the Possible Causes of the DTC P1506 Mazda?

Faulty Idle Air Control (IAC) valve
Idle Air Control (IAC) valve harness is open or shorted
Idle Air Control (IAC) valve circuit poor electrical connection

How to Fix the DTC P1506 Mazda?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P1506 code means that the engine idle is out of factory specification. Sometimes the Idle Air Control (IAC) may have carbon built up. Disconnect the car battery, remove the valve, clean, re-install valve, and drive the vehicle for about 5 minutes with the headlights and A/C ON to get the idle relearned.
Also, check for intake leaks or stuck PCV Valve.
If the problem persistss, the IAC valve may need to be replaced.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1506 Mazda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1506 Mazda code?

Need more information on how to fix the P1506 Mazda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1506 Mazda code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1506 Mazda Code

1. What does the OBDII code P1506 mean on a Mazda?

P1506 on a Mazda indicates an "Idle Air Control Overspeed Error," meaning the engine's idle speed is higher than the specified limit set by the manufacturer.

2. What are the common symptoms of a P1506 code on a Mazda?

Symptoms include high or fluctuating idle speed, engine stalling, poor fuel economy, and the check engine light being illuminated.

3. What causes the P1506 code to appear on a Mazda?

The code can be caused by a faulty idle air control (IAC) valve, vacuum leaks, a dirty throttle body, or issues with wiring or connections to the IAC valve.

4. Can a dirty throttle body trigger the P1506 code?

Yes, a dirty throttle body can restrict airflow regulation, leading to an idle overspeed error and triggering the P1506 code.

5. How do I fix the P1506 code on a Mazda?

To fix the P1506 code, clean the throttle body, inspect and repair any vacuum leaks, test and replace the idle air control valve if necessary, and check for wiring or connection issues.

6. Can driving with a P1506 code damage my Mazda?

Driving with a P1506 code may not immediately damage the vehicle, but prolonged high idle speed can lead to increased wear on engine components and reduced fuel efficiency.

7. How do I test the idle air control valve to diagnose the P1506 code?

You can test the IAC valve by measuring its resistance with a multimeter and observing its operation while the engine is running. Refer to your vehicle's service manual for specific procedures.

8. Can a vacuum leak cause the P1506 code on a Mazda?

Yes, a vacuum leak can cause unregulated air to enter the intake manifold, leading to an idle overspeed condition and triggering the P1506 code.

9. Will clearing the code fix the P1506 issue on my Mazda?

Clearing the code may temporarily turn off the check engine light, but the underlying issue must be addressed to prevent the code from reappearing.

10. How much does it typically cost to repair a P1506 code on a Mazda?

Repair costs vary depending on the cause but can range from $20 for a simple throttle body cleaning to $300 or more for parts and labor to replace a faulty idle air control valve or repair vacuum leaks.