AutoCodesMitsubishi – P1496 Mitsubishi

P1496 Mitsubishi Code - 5 Volt Supply Output Too Low

Quick Answer

P1496 Mitsubishi indicates 5 Volt Supply Output Too Low. Common causes include Shorted sensor, Sensor harness is open or shorted, Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1496 Mitsubishi indicates 5 Volt Supply Output Too Low.
Common causes
Common causes include Shorted sensor, Sensor harness is open or shorted, Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,439
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 25, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1496 Mitsubishi Description

OBDII Code P1496 Mitsubishi - 5 Volt Supply Output Too Low - AutoCodes.com
P1496 Mitsubishi Code - 5 Volt Supply Output Too Low

What are the Possible Causes of the DTC P1496 Mitsubishi?

  • Shorted sensor
  • Sensor harness is open or shorted
  • Sensor circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P1496 Mitsubishi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1496 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1496 Mitsubishi code?

Need more information on how to fix the P1496 Mitsubishi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1496 Mitsubishi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1496 Mitsubishi Code

1. What does the OBDII code P1496 mean for a Mitsubishi?

P1496 indicates that the Powertrain Control Module (PCM) has detected the 5-volt reference supply to sensors is too low, which can affect engine performance.

2. What are the common symptoms of the P1496 code in a Mitsubishi?

Symptoms may include poor engine performance, stalling, difficulty starting, erratic sensor readings, or the Check Engine Light being illuminated.

3. What causes the P1496 code to trigger in a Mitsubishi?

Common causes include a short circuit in the 5-volt reference circuit, a faulty sensor that uses the 5-volt supply, damaged wiring, or a malfunctioning PCM.

4. Can a bad sensor cause the P1496 code in a Mitsubishi?

Yes, a faulty sensor that uses the 5-volt reference, such as the throttle position sensor or MAP sensor, can cause the P1496 code.

5. How do I diagnose the P1496 code in a Mitsubishi?

Start by inspecting the wiring and connectors for damage, test the 5-volt reference circuit with a multimeter, and check for faulty sensors. If no issues are found, the PCM may need to be tested.

6. Is the P1496 code serious in a Mitsubishi?

Yes, it can be serious as it may affect engine performance and drivability. Prompt diagnosis and repair are recommended to prevent further issues.

7. How can I fix the P1496 code in a Mitsubishi?

Repairs may involve fixing or replacing damaged wiring, cleaning or replacing a faulty sensor, or, in rare cases, replacing the PCM.

8. Can a weak battery cause the P1496 code in a Mitsubishi?

While uncommon, a weak or failing battery could potentially cause low voltage issues, indirectly triggering the code. Testing the battery and charging system is recommended.

9. How much does it cost to repair the P1496 code in a Mitsubishi?

Repair costs vary depending on the cause, but fixing wiring or replacing a sensor typically costs $100–$300. PCM replacement may cost significantly more.

10. Can I drive my Mitsubishi with the P1496 code?

It’s not recommended to drive with this code, as it can lead to poor engine performance and potentially cause further damage to the vehicle.

Discuss the causes and fixes for P1496 Mitsubishi OBDII Code

Code P1496 Mitsubishi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play