P1488 2017 GMC Sierra Code - Particulate Matter Sensor Protection Tube Performance
Quick Answer
The Particulate Matter (PM) sensor monitors the amount of the particulates (soot) in the diesel exhaust gas exiting the tailpipe. Common causes include Faulty Exhaust Particulate Matter Sensor, Exhaust Particulate Matter Sensor harness is open or shorted, Exhaust Particulate Matter Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1488 2017 GMC Sierra indicates Particulate Matter Sensor Protection Tube Performance.
- Common causes
- Common causes include Faulty Exhaust Particulate Matter Sensor, Exhaust Particulate Matter Sensor harness is open or shorted, Exhaust Particulate Matter Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1488 2017 GMC Sierra Description
The operation of the PM Sensor is based on the electrical conductivity characteristic of the diesel particulate. As the exhaust gas flows over the sensing element, soot is absorbed in the combs between the electrodes, eventually creating a conductive path. When the path is formed, it generates a current based on the voltage being applied to the element. The measurement process continues until a preset current value is reached. To avoid misleading readings, the sensor performs a regeneration where the soot is cleaned off by heating up the element before the measurement phase begins. The amount of regenerations is based on vehicle strategy; when the calibrated number of regenerations is reached, the cumulative current readings are used to determine the amount of soot concentration in the exhaust gas which in turn determines the collection efficiency of the Diesel Particulate Filter (DPF).
The Diagnostic Trouble Code (DTC) will be set when the particular matter sensor control unit detects a fault in the particulate matter sensor circuitry.
What are the Possible Causes of the DTC P1488 2017 GMC Sierra?
- Faulty Exhaust Particulate Matter Sensor
- Exhaust Particulate Matter Sensor harness is open or shorted
- Exhaust Particulate Matter Sensor circuit poor electrical connection
How to Fix the DTC P1488 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1488 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1488 2017 GMC Sierra code?
Need more information on how to fix the P1488 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1488 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1488 2017 GMC Sierra Code
1. What does the OBDII code P1488 mean on a 2017 GMC Sierra?
P1488 indicates an issue with the Particulate Matter (PM) Sensor Protection Tube, specifically related to its performance or functionality.
2. What are the common symptoms of code P1488 in a 2017 GMC Sierra?
Symptoms may include reduced engine performance, poor fuel economy, illuminated check engine light, and possible diesel particulate filter (DPF) regeneration issues.
3. What causes the P1488 code to appear?
The most common causes include a clogged or damaged PM Sensor Protection Tube, an issue with the PM sensor itself, excessive soot buildup, or wiring/connectivity problems.
4. Can I still drive my 2017 GMC Sierra with the P1488 code active?
While it may be possible to drive, continuing to operate the vehicle without addressing the issue can lead to more severe problems, such as damage to the DPF or increased emissions.
5. How is the P1488 code diagnosed?
A mechanic will typically use a scan tool to confirm the code, inspect the PM sensor and protection tube, check for soot buildup, and test the wiring and connectors for any faults.
6. How can I fix the P1488 code on my 2017 GMC Sierra?
Repairs may include cleaning or replacing the PM Sensor Protection Tube, repairing or replacing the PM sensor, addressing wiring issues, or performing a forced DPF regeneration.
7. How much does it cost to fix the P1488 code?
The cost can vary depending on the issue, but cleaning the protection tube may cost less, while replacing the PM sensor or associated parts could range from $200 to $600 or more.
8. Can a dirty diesel particulate filter cause the P1488 code?
Yes, excessive soot buildup in the DPF can lead to problems with the PM Sensor Protection Tube and trigger the P1488 code.
9. What tools are needed to fix the P1488 code on a GMC Sierra?
Basic tools include a scan tool for diagnostics, a multimeter for wiring checks, and potentially cleaning or replacement tools for the PM sensor and protection tube.
10. Is the P1488 code specific to diesel engines?
Yes, this code is specific to diesel engines as it relates to the particulate matter sensor, which is part of the emissions system in diesel vehicles.
Discuss the causes and fixes for P1488 2017 GMC Sierra OBDII Code
Code P1488 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
